chore: fix test

This PR adds a few unification hints that we will need after
`backward.isDefEq.respectTransparency` is `true` by default.

.claude/CLAUDE.md

@@ -1,60 +1,6 @@
-(In the following, use `sysctl -n hw.logicalcpu` instead of `nproc` on macOS)
+To build Lean you should use `make -j -C build/release`.
 
-## Building
-
-To build Lean you should use `make -j$(nproc) -C build/release`.
-
-The build uses `ccache`, and in a sandbox `ccache` may complain about read-only file systems.
-Use `CCACHE_READONLY` and `CCACHE_TEMPDIR` instead of disabling ccache completely.
-
-## Running Tests
-
-See `tests/README.md` for full documentation. Quick reference:
-
-```bash
-# Full test suite (use after builds to verify correctness)
-CTEST_PARALLEL_LEVEL="$(nproc)" CTEST_OUTPUT_ON_FAILURE=1 \
-make -C build/release -j "$(nproc)" test
-
-# Specific test by name (supports regex via ctest -R; double-quote special chars like |)
-CTEST_PARALLEL_LEVEL="$(nproc)" CTEST_OUTPUT_ON_FAILURE=1 \
-make -C build/release -j "$(nproc)" test ARGS="-R 'grind_ematch'"
-
-# Multiple tests matching a pattern
-CTEST_PARALLEL_LEVEL="$(nproc)" CTEST_OUTPUT_ON_FAILURE=1 \
-make -C build/release -j "$(nproc)" test ARGS="-R 'treemap|phashmap'"
-
-# Rerun only previously failed tests
-CTEST_PARALLEL_LEVEL="$(nproc)" CTEST_OUTPUT_ON_FAILURE=1 \
-make -C build/release -j "$(nproc)" test ARGS='--rerun-failed'
-
-# Run a test manually without ctest (test pile: pass filename relative to the pile dir)
-tests/with_stage1_test_env.sh tests/elab_bench/run_bench.sh cbv_decide.lean
-tests/with_stage1_test_env.sh tests/elab/run_test.sh grind_indexmap.lean
-```
-
-## Benchmark vs Test Problem Sizes
-
-Benchmarks are also run as tests. Use the `TEST_BENCH` environment variable (unset in tests, set to `1` in benchmarks) to scale problem sizes:
-
-- In `compile_bench` `.init.sh` files: check `$TEST_BENCH` and set `TEST_ARGS` accordingly
-- In `elab_bench` Lean files: use `(← IO.getEnv "TEST_BENCH") == some "1"` to switch between small (test) and large (bench) inputs
-
-See `tests/README.md` for the full benchmark writing guide.
-
-## Testing stage 2
-
-When requested to test stage 2, build it as follows:
-```
-make -C build/release stage2 -j$(nproc)
-```
-Stage 2 is *not* automatically invalidated by changes to `src/` which allows for faster iteration
-when fixing a specific file in the stage 2 build but for invalidating any files that already passed
-the stage 2 build as well as for final validation,
-```
-make -C build/release/stage2 clean-stdlib
-```
-must be run manually before building.
+To run a test you should use `cd tests/lean/run && ./test_single.sh example_test.lean`.
 
 ## New features
 
@@ -63,6 +9,8 @@ When asked to implement new features:
 * write comprehensive tests first (expecting that these will initially fail)
 * and then iterate on the implementation until the tests pass.
 
+All new tests should go in `tests/lean/run/`. These tests don't have expected output; we just check there are no errors. You should use `#guard_msgs` to check for specific messages.
+
 ## Success Criteria
 
 *Never* report success on a task unless you have verified both a clean build without errors, and that the relevant tests pass.
@@ -70,13 +18,9 @@ When asked to implement new features:
 ## Build System Safety
 
 **NEVER manually delete build directories** (build/, stage0/, stage1/, etc.) even when builds fail.
-- ONLY use the project's documented build command: `make -j$(nproc) -C build/release`
+- ONLY use the project's documented build command: `make -j -C build/release`
 - If a build is broken, ask the user before attempting any manual cleanup
 
-## stage0 Is a Copy of src
-
-**Never manually edit files under `stage0/`.** The `stage0/` directory is a snapshot of `src/` produced by `make update-stage0`. To change anything in stage0 (CMakeLists.txt, C++ source, etc.), edit the corresponding file in `src/` and let `update-stage0` propagate it.
-
 ## LSP and IDE Diagnostics
 
 After rebuilding, LSP diagnostics may be stale until the user interacts with files. Trust command-line test results over IDE diagnostics.
@@ -92,7 +36,7 @@ Follow the commit convention in `doc/dev/commit_convention.md`.
 **Title format:** `<type>: <subject>` where type is one of: `feat`, `fix`, `doc`, `style`, `refactor`, `test`, `chore`, `perf`.
 Subject should use imperative present tense ("add" not "added"), no capitalization, no trailing period.
 
-**Body format:** The first paragraph must start with "This PR". This paragraph is automatically incorporated into release notes. Use imperative present tense. Include motivation and contrast with previous behavior when relevant. Do NOT use markdown headings (`## Summary`, `## Test plan`, etc.) in PR bodies.
+**Body format:** The first paragraph must start with "This PR". This paragraph is automatically incorporated into release notes. Use imperative present tense. Include motivation and contrast with previous behavior when relevant.
 
 Example:
 ```
@@ -117,27 +61,6 @@ leading quantifiers are stripped when creating a pattern.
 
 If you're unsure which label applies, it's fine to omit the label and let reviewers add it.
 
-## Module System for `src/` Files
-
-Files in `src/Lean/`, `src/Std/`, and `src/lake/Lake/` must have both `module` and `prelude` (CI enforces `^prelude$` on its own line). With `prelude`, nothing is auto-imported — you must explicitly import `Init.*` modules for standard library features. Check existing files in the same directory for the pattern, e.g.:
-
-```lean
-module
-
-prelude
-import Init.While  -- needed for while/repeat
-import Init.Data.String.TakeDrop  -- needed for String.startsWith
-public import Lean.Compiler.NameMangling  -- public if types are used in public signatures
-```
-
-Files outside these directories (e.g. `tests/`, `script/`) use just `module`.
-
 ## CI Log Retrieval
 
 When CI jobs fail, investigate immediately - don't wait for other jobs to complete. Individual job logs are often available even while other jobs are still running. Try `gh run view <run-id> --log` or `gh run view <run-id> --log-failed`, or use `gh run view <run-id> --job=<job-id>` to target the specific failed job. Sleeping is fine when asked to monitor CI and no failures exist yet, but once any job fails, investigate that failure immediately.
-
-## Copyright Headers
-
-New files require a copyright header. To get the year right, always run `date +%Y` rather than relying on memory. The copyright holder should be the author or their current employer — check other recent files by the same author in the repository to determine the correct entity (e.g., "Lean FRO, LLC", "Amazon.com, Inc. or its affiliates").
-
-Test files (in `tests/`) do not need copyright headers.

.claude/commands/release.md

@@ -103,15 +103,6 @@ Every time you run `release_checklist.py`, you MUST:
 This summary should be provided EVERY time you run the checklist, not just after creating new PRs.
 The user needs to see the complete picture of what's waiting for review.
 
-## Checking PR Status When Asked
-
-When the user asks for "status" or you need to report on PRs between checklist runs:
-- **ALWAYS check actual PR state** using `gh pr view <number> --repo <repo> --json state,mergedAt`
-- Do NOT rely on cached CI results or previous checklist output
-- The user may have merged PRs since your last check
-- Report which PRs are MERGED, which are OPEN with CI status, and which are still pending
-- After discovering merged PRs, rerun `release_checklist.py` to advance the release process
-
 ## Nightly Infrastructure
 
 The nightly build system uses branches and tags across two repositories:
@@ -121,42 +112,6 @@ The nightly build system uses branches and tags across two repositories:
 
 When a nightly succeeds with mathlib, all three should point to the same commit. Don't confuse these: branches are in the main lean4 repo, dated tags are in lean4-nightly.
 
-## CI Failures: Investigate Immediately
-
-**CRITICAL: If the checklist reports `❌ CI: X check(s) failing` for any PR, investigate immediately.**
-
-Do NOT:
-- Report it as "CI in progress" or "some checks pending"
-- Wait for the remaining checks to finish before investigating
-- Assume it's a transient failure without checking
-
-DO:
-1. Run `gh pr checks <number> --repo <owner>/<repo>` to see which specific check failed
-2. Run `gh run view <run-id> --repo <owner>/<repo> --log-failed` to see the failure output
-3. Diagnose the failure and report clearly to the user: what failed and why
-4. Propose a fix if one is obvious (e.g., subverso version mismatch, transient elan install error)
-
-The checklist now distinguishes `❌ X check(s) failing, Y still in progress` from `🔄 Y check(s) in progress`.
-Any `❌` in CI status requires immediate investigation — do not move on.
-
-## Waiting for CI or Merges
-
-Use `gh pr checks --watch` to block until a PR's CI checks complete (no polling needed).
-Run these as background bash commands so you get notified when they finish:
-
-```bash
-# Watch CI, then check merge state
-gh pr checks <number> --repo <owner>/<repo> --watch && gh pr view <number> --repo <owner>/<repo> --json state --jq '.state'
-```
-
-For multiple PRs, launch one background command per PR in parallel. When each completes,
-you'll be notified automatically via a task-notification. Do NOT use sleep-based polling
-loops — `--watch` is event-driven and exits as soon as checks finish.
-
-Note: `gh pr checks --watch` exits as soon as ALL checks complete (pass or fail). If some checks
-fail while others are still running, `--watch` will continue until everything settles, then exit
-with a non-zero code. So a background `--watch` finishing = all checks done; check which failed.
-
 ## Error Handling
 
 **CRITICAL**: If something goes wrong or a command fails:

.claude/settings.json

@@ -1,13 +0,0 @@
-{
-  "extraKnownMarketplaces": {
-    "leanprover": {
-      "source": {
-        "source": "github",
-        "repo": "leanprover/skills"
-      }
-    }
-  },
-  "enabledPlugins": {
-    "lean@leanprover": true
-  }
-}

.claude/skills/profiling/SKILL.md

@@ -1,26 +0,0 @@
----
-name: profiling
-description: Profile Lean programs with demangled names using samply and Firefox Profiler. Use when the user asks to profile a Lean binary or investigate performance.
-allowed-tools: Bash, Read, Glob, Grep
----
-
-# Profiling Lean Programs
-
-Full documentation: `script/PROFILER_README.md`.
-
-## Quick Start
-
-```bash
-script/lean_profile.sh ./build/release/stage1/bin/lean some_file.lean
-```
-
-Requires `samply` (`cargo install samply`) and `python3`.
-
-## Agent Notes
-
-- The pipeline is interactive (serves to browser at the end). When running non-interactively, run the steps manually instead of using the wrapper script.
-- The three steps are: `samply record --save-only`, `symbolicate_profile.py`, then `serve_profile.py`.
-- `lean_demangle.py` works standalone as a stdin filter (like `c++filt`) for quick name lookups.
-- The `--raw` flag on `lean_demangle.py` gives exact demangled names without postprocessing (keeps `._redArg`, `._lam_0` suffixes as-is).
-- Use `PROFILE_KEEP=1` to keep the temp directory for later inspection.
-- The demangled profile is a standard Firefox Profiler JSON. Function names live in `threads[i].stringArray`, indexed by `threads[i].funcTable.name`.

.claude/skills/zulip-extract/SKILL.md

@@ -1,17 +0,0 @@
----
-name: zulip-extract
-description: Extract Zulip thread HTML dumps into readable plain text. Use when the user provides a Zulip HTML file or asks to parse/read/convert/summarize a Zulip thread.
----
-
-# Zulip Thread Extractor
-
-Run the bundled script to convert a Zulip HTML page dump into plain text.
-
-## Usage
-```bash
-python3 .claude/skills/zulip-extract/zulip_thread_extract.py input.html output.txt
-```
-
-The script has zero dependencies beyond Python 3 stdlib.
-It extracts sender, timestamp, message content (with code blocks,
-links, quotes, mentions), and reactions.

.claude/skills/zulip-extract/zulip_thread_extract.py

@@ -1,313 +0,0 @@
-#!/usr/bin/env python3
-"""
-Convert a Zulip HTML page dump to plain text (the visible message thread).
-
-Zero external dependencies — uses only the Python standard library.
-
-Usage:
-    python3 zulip_thread_extract.py input.html [output.txt]
-"""
-
-import sys
-import re
-from html.parser import HTMLParser
-from html import unescape
-
-
-# ---------------------------------------------------------------------------
-# Minimal DOM built from stdlib HTMLParser
-# ---------------------------------------------------------------------------
-
-class Node:
-    """A lightweight DOM node."""
-    __slots__ = ('tag', 'attrs', 'children', 'parent', 'text')
-
-    def __init__(self, tag='', attrs=None):
-        self.tag = tag
-        self.attrs = dict(attrs) if attrs else {}
-        self.children = []
-        self.parent = None
-        self.text = ''  # for text nodes only (tag == '')
-
-    @property
-    def cls(self):
-        return self.attrs.get('class', '')
-
-    def has_class(self, c):
-        return c in self.cls.split()
-
-    def find_all(self, tag=None, class_=None):
-        """Depth-first search for matching descendants."""
-        for child in self.children:
-            if child.tag == '':
-                continue
-            match = True
-            if tag and child.tag != tag:
-                match = False
-            if class_ and not child.has_class(class_):
-                match = False
-            if match:
-                yield child
-            yield from child.find_all(tag, class_)
-
-    def find(self, tag=None, class_=None):
-        return next(self.find_all(tag, class_), None)
-
-    def get_text(self):
-        if self.tag == '':
-            return self.text
-        return ''.join(c.get_text() for c in self.children)
-
-
-class DOMBuilder(HTMLParser):
-    """Build a minimal DOM tree from HTML."""
-
-    VOID_ELEMENTS = frozenset([
-        'area', 'base', 'br', 'col', 'embed', 'hr', 'img', 'input',
-        'link', 'meta', 'param', 'source', 'track', 'wbr',
-    ])
-
-    def __init__(self):
-        super().__init__()
-        self.root = Node('root')
-        self._cur = self.root
-
-    def handle_starttag(self, tag, attrs):
-        node = Node(tag, attrs)
-        node.parent = self._cur
-        self._cur.children.append(node)
-        if tag not in self.VOID_ELEMENTS:
-            self._cur = node
-
-    def handle_endtag(self, tag):
-        # Walk up to find the matching open tag (tolerates misnesting)
-        n = self._cur
-        while n and n.tag != tag and n.parent:
-            n = n.parent
-        if n and n.parent:
-            self._cur = n.parent
-
-    def handle_data(self, data):
-        t = Node()
-        t.text = data
-        t.parent = self._cur
-        self._cur.children.append(t)
-
-    def handle_entityref(self, name):
-        self.handle_data(unescape(f'&{name};'))
-
-    def handle_charref(self, name):
-        self.handle_data(unescape(f'&#{name};'))
-
-
-def parse_html(path):
-    with open(path, 'r', encoding='utf-8') as f:
-        html = f.read()
-    builder = DOMBuilder()
-    builder.feed(html)
-    return builder.root
-
-
-# ---------------------------------------------------------------------------
-# Content extraction
-# ---------------------------------------------------------------------------
-
-SKIP_CLASSES = {
-    'message_controls', 'message_length_controller',
-    'code-buttons-container', 'copy_codeblock', 'code_external_link',
-    'message_edit_notice', 'edit-notifications',
-}
-
-def should_skip(node):
-    return bool(SKIP_CLASSES & set(node.cls.split()))
-
-
-def extract_content(node):
-    """Recursively convert a message_content node into readable text."""
-    parts = []
-    for child in node.children:
-        # Text node
-        if child.tag == '':
-            parts.append(child.text)
-            continue
-
-        if should_skip(child):
-            continue
-
-        cls_set = set(child.cls.split())
-
-        # Code block wrappers  (div.codehilite / div.zulip-code-block)
-        if child.tag == 'div' and ({'codehilite', 'zulip-code-block'} & cls_set):
-            code = child.find('code')
-            lang = child.attrs.get('data-code-language', '')
-            text = code.get_text() if code else child.get_text()
-            parts.append(f'\n```{lang}\n{text}```\n')
-            continue
-
-        # <pre> (bare code blocks without wrapper div)
-        if child.tag == 'pre':
-            code = child.find('code')
-            text = code.get_text() if code else child.get_text()
-            parts.append(f'\n```\n{text}```\n')
-            continue
-
-        # Inline <code>
-        if child.tag == 'code':
-            parts.append(f'`{child.get_text()}`')
-            continue
-
-        # Paragraph
-        if child.tag == 'p':
-            inner = extract_content(child)
-            parts.append(f'\n{inner}\n')
-            continue
-
-        # Line break
-        if child.tag == 'br':
-            parts.append('\n')
-            continue
-
-        # Links
-        if child.tag == 'a':
-            href = child.attrs.get('href', '')
-            text = child.get_text().strip()
-            if href and not href.startswith('#') and text:
-                parts.append(f'[{text}]({href})')
-            else:
-                parts.append(text)
-            continue
-
-        # Block quotes
-        if child.tag == 'blockquote':
-            bq = extract_content(child).strip()
-            parts.append('\n' + '\n'.join(f'> {l}' for l in bq.split('\n')) + '\n')
-            continue
-
-        # Lists
-        if child.tag in ('ul', 'ol'):
-            for i, li in enumerate(c for c in child.children if c.tag == 'li'):
-                pfx = f'{i+1}.' if child.tag == 'ol' else '-'
-                parts.append(f'\n{pfx} {extract_content(li).strip()}')
-            parts.append('\n')
-            continue
-
-        # User mentions
-        if 'user-mention' in cls_set:
-            parts.append(f'@{child.get_text().strip().lstrip("@")}')
-            continue
-
-        # Emoji
-        if 'emoji' in cls_set:
-            alt = child.attrs.get('alt', '') or child.attrs.get('title', '')
-            if alt:
-                parts.append(alt)
-            continue
-
-        # Recurse into everything else
-        parts.append(extract_content(child))
-
-    return ''.join(parts)
-
-
-# ---------------------------------------------------------------------------
-# Thread extraction
-# ---------------------------------------------------------------------------
-
-def extract_thread(html_path, output_path=None):
-    root = parse_html(html_path)
-
-    # Find the message list
-    msg_list = root.find('div', class_='message-list')
-    if not msg_list:
-        print("ERROR: Could not find message list.", file=sys.stderr)
-        sys.exit(1)
-
-    # Topic header
-    header = msg_list.find('div', class_='message_header')
-    stream_name = topic_name = date_str = ''
-    if header:
-        el = header.find('span', class_='message-header-stream-name')
-        if el: stream_name = el.get_text().strip()
-        el = header.find('span', class_='stream-topic-inner')
-        if el: topic_name = el.get_text().strip()
-        el = header.find('span', class_='recipient_row_date')
-        if el:
-            tr = el.find('span', class_='timerender-content')
-            if tr:
-                date_str = tr.attrs.get('data-tippy-content', '') or tr.get_text().strip()
-
-    # Messages
-    messages = []
-    for row in msg_list.find_all('div', class_='message_row'):
-        if not row.has_class('messagebox-includes-sender'):
-            continue
-
-        msg = {}
-
-        sn = row.find('span', class_='sender_name_text')
-        if sn:
-            un = sn.find('span', class_='user-name')
-            msg['sender'] = (un or sn).get_text().strip()
-
-        tm = row.find('a', class_='message-time')
-        if tm:
-            msg['time'] = tm.get_text().strip()
-
-        cd = row.find('div', class_='message_content')
-        if cd:
-            text = extract_content(cd)
-            text = re.sub(r'\n{3,}', '\n\n', text).strip()
-            msg['content'] = text
-
-        # Reactions
-        reactions = []
-        for rx in row.find_all('div', class_='message_reaction'):
-            em = rx.find('div', class_='emoji_alt_code')
-            if em:
-                reactions.append(em.get_text().strip())
-            else:
-                img = rx.find(tag='img')
-                if img:
-                    reactions.append(img.attrs.get('alt', ''))
-            cnt = rx.find('span', class_='message_reaction_count')
-            if cnt and reactions:
-                c = cnt.get_text().strip()
-                if c and c != '1':
-                    reactions[-1] += f' x{c}'
-        if reactions:
-            msg['reactions'] = reactions
-
-        if msg.get('content') or msg.get('sender'):
-            messages.append(msg)
-
-    # Format
-    lines = [
-        '=' * 70,
-        f'# {stream_name} > {topic_name}',
-    ]
-    if date_str:
-        lines.append(f'# Started: {date_str}')
-    lines += [f'# Messages: {len(messages)}', '=' * 70, '']
-
-    for msg in messages:
-        lines.append(f'--- {msg.get("sender","?")}  [{msg.get("time","")}] ---')
-        lines.append(msg.get('content', ''))
-        if msg.get('reactions'):
-            lines.append(f'  Reactions: {", ".join(msg["reactions"])}')
-        lines.append('')
-
-    result = '\n'.join(lines)
-    if output_path:
-        with open(output_path, 'w', encoding='utf-8') as f:
-            f.write(result)
-        print(f"Written {len(messages)} messages to {output_path}")
-    else:
-        print(result)
-
-
-if __name__ == '__main__':
-    if len(sys.argv) < 2:
-        print(f"Usage: {sys.argv[0]} input.html [output.txt]")
-        sys.exit(1)
-    extract_thread(sys.argv[1], sys.argv[2] if len(sys.argv) > 2 else None)
-

.gitattributes

@@ -5,3 +5,9 @@ stage0/** binary linguist-generated
 # The following file is often manually edited, so do show it in diffs
 stage0/src/stdlib_flags.h -binary -linguist-generated
 doc/std/grove/GroveStdlib/Generated/** linguist-generated
+# These files should not have line endings translated on Windows, because
+# it throws off parser tests. Later lines override earlier ones, so the
+# runner code is still treated as ordinary text.
+tests/lean/docparse/* eol=lf
+tests/lean/docparse/*.lean eol=auto
+tests/lean/docparse/*.sh eol=auto

.github/workflows/awaiting-manual.yml

@@ -2,19 +2,16 @@ name: Check awaiting-manual label
 
 on:
   merge_group:
-  pull_request_target:
+  pull_request:
     types: [opened, synchronize, reopened, labeled, unlabeled]
 
-permissions:
-  pull-requests: read
-
 jobs:
   check-awaiting-manual:
     runs-on: ubuntu-latest
     steps:
       - name: Check awaiting-manual label
         id: check-awaiting-manual-label
-        if: github.event_name == 'pull_request_target'
+        if: github.event_name == 'pull_request'
         uses: actions/github-script@v8
         with:
           script: |
@@ -31,7 +28,7 @@ jobs:
             }
       
       - name: Wait for manual compatibility
-        if: github.event_name == 'pull_request_target' && steps.check-awaiting-manual-label.outputs.awaiting == 'true'
+        if: github.event_name == 'pull_request' && steps.check-awaiting-manual-label.outputs.awaiting == 'true'
         run: |
           echo "::notice title=Awaiting manual::PR is marked 'awaiting-manual' but neither 'breaks-manual' nor 'builds-manual' labels are present."
           echo "This check will remain in progress until the PR is updated with appropriate manual compatibility labels."

.github/workflows/awaiting-mathlib.yml

@@ -2,19 +2,16 @@ name: Check awaiting-mathlib label
 
 on:
   merge_group:
-  pull_request_target:
+  pull_request:
     types: [opened, synchronize, reopened, labeled, unlabeled]
 
-permissions:
-  pull-requests: read
-
 jobs:
   check-awaiting-mathlib:
     runs-on: ubuntu-latest
     steps:
       - name: Check awaiting-mathlib label
         id: check-awaiting-mathlib-label
-        if: github.event_name == 'pull_request_target'
+        if: github.event_name == 'pull_request'
         uses: actions/github-script@v8
         with:
           script: |
@@ -31,7 +28,7 @@ jobs:
             }
       
       - name: Wait for mathlib compatibility
-        if: github.event_name == 'pull_request_target' && steps.check-awaiting-mathlib-label.outputs.awaiting == 'true'
+        if: github.event_name == 'pull_request' && steps.check-awaiting-mathlib-label.outputs.awaiting == 'true'
         run: |
           echo "::notice title=Awaiting mathlib::PR is marked 'awaiting-mathlib' but neither 'breaks-mathlib' nor 'builds-mathlib' labels are present."
           echo "This check will remain in progress until the PR is updated with appropriate mathlib compatibility labels."

.github/workflows/build-template.yml

@@ -49,7 +49,7 @@ jobs:
       LSAN_OPTIONS: max_leaks=10
       # somehow MinGW clang64 (or cmake?) defaults to `g++` even though it doesn't exist
       CXX: c++
-      MACOSX_DEPLOYMENT_TARGET: 11.0
+      MACOSX_DEPLOYMENT_TARGET: 10.15
     steps:
       - name: Install Nix
         uses: DeterminateSystems/nix-installer-action@main
@@ -66,10 +66,16 @@ jobs:
           brew install ccache tree zstd coreutils gmp libuv
         if: runner.os == 'macOS'
       - name: Checkout
+        if: (!endsWith(matrix.os, '-with-cache'))
         uses: actions/checkout@v6
         with:
           # the default is to use a virtual merge commit between the PR and master: just use the PR
           ref: ${{ github.event.pull_request.head.sha }}
+      - name: Namespace Checkout
+        if: endsWith(matrix.os, '-with-cache')
+        uses: namespacelabs/nscloud-checkout-action@v8
+        with:
+          ref: ${{ github.event.pull_request.head.sha }}
       - name: Open Nix shell once
         run: true
         if: runner.os == 'Linux'
@@ -79,7 +85,7 @@ jobs:
       - name: CI Merge Checkout
         run: |
           git fetch --depth=1 origin ${{ github.sha }}
-          git checkout FETCH_HEAD flake.nix flake.lock script/prepare-* tests/elab/importStructure.lean
+          git checkout FETCH_HEAD flake.nix flake.lock script/prepare-* tests/lean/run/importStructure.lean
         if: github.event_name == 'pull_request'
       # (needs to be after "Checkout" so files don't get overridden)
       - name: Setup emsdk
@@ -229,21 +235,25 @@ jobs:
         # prefix `if` above with `always` so it's run even if tests failed
         if: always() && steps.test.conclusion != 'skipped'
       - name: Check Test Binary
-        run: ${{ matrix.binary-check }} tests/compile/534.lean.out
+        run: ${{ matrix.binary-check }} tests/compiler/534.lean.out
         if: (!matrix.cross) && steps.test.conclusion != 'skipped'
       - name: Build Stage 2
         run: |
           make -C build -j$NPROC stage2
-        if: matrix.test-bench
+        if: matrix.test-speedcenter
       - name: Check Stage 3
         run: |
           make -C build -j$NPROC check-stage3
         if: matrix.check-stage3
-      - name: Test Benchmarks
+      - name: Test Speedcenter Benchmarks
         run: |
-          cd tests
-          nix develop -c make -C ../build -j$NPROC bench
-        if: matrix.test-bench
+          # Necessary for some timing metrics but does not work on Namespace runners
+          # and we just want to test that the benchmarks run at all here
+          #echo -1 | sudo tee /proc/sys/kernel/perf_event_paranoid
+          export BUILD=$PWD/build PATH=$PWD/build/stage1/bin:$PATH
+          cd tests/bench
+          nix shell .#temci -c temci exec --config speedcenter.yaml --included_blocks fast --runs 1
+        if: matrix.test-speedcenter
       - name: Check rebootstrap
         run: |
           set -e

.github/workflows/check-stdlib-flags.yml

@@ -1,12 +1,9 @@
 name: Check stdlib_flags.h modifications
 
 on:
-  pull_request_target:
+  pull_request:
     types: [opened, synchronize, reopened, labeled, unlabeled]
 
-permissions:
-  pull-requests: read
-
 jobs:
   check-stdlib-flags:
     runs-on: ubuntu-latest

.github/workflows/ci.yml

@@ -60,23 +60,10 @@ jobs:
           if [[ -n '${{ secrets.PUSH_NIGHTLY_TOKEN }}' ]]; then
             git remote add nightly https://foo:'${{ secrets.PUSH_NIGHTLY_TOKEN }}'@github.com/${{ github.repository_owner }}/lean4-nightly.git
             git fetch nightly --tags
-            if [[ '${{ github.event_name }}' == 'workflow_dispatch' ]]; then
-              # Manual re-release: create a revision of the most recent nightly
-              BASE_NIGHTLY=$(git tag -l 'nightly-*' | sort -rV | head -1)
-              # Strip any existing -revK suffix to get the base date tag
-              BASE_NIGHTLY="${BASE_NIGHTLY%%-rev*}"
-              REV=1
-              while git rev-parse "refs/tags/${BASE_NIGHTLY}-rev${REV}" >/dev/null 2>&1; do
-                REV=$((REV + 1))
-              done
-              LEAN_VERSION_STRING="${BASE_NIGHTLY}-rev${REV}"
+            LEAN_VERSION_STRING="nightly-$(date -u +%F)"
+            # do nothing if commit already has a different tag
+            if [[ "$(git name-rev --name-only --tags --no-undefined HEAD 2> /dev/null || echo "$LEAN_VERSION_STRING")" == "$LEAN_VERSION_STRING" ]]; then
               echo "nightly=$LEAN_VERSION_STRING" >> "$GITHUB_OUTPUT"
-            else
-              # Scheduled: do nothing if commit already has a different tag
-              LEAN_VERSION_STRING="nightly-$(date -u +%F)"
-              if [[ "$(git name-rev --name-only --tags --no-undefined HEAD 2> /dev/null || echo "$LEAN_VERSION_STRING")" == "$LEAN_VERSION_STRING" ]]; then
-                echo "nightly=$LEAN_VERSION_STRING" >> "$GITHUB_OUTPUT"
-              fi
             fi
           fi
 
@@ -166,7 +153,7 @@ jobs:
       # 0: PRs without special label
       # 1: PRs with `merge-ci` label, merge queue checks, master commits
       # 2: nightlies
-      # 3: PRs with `release-ci` or `lake-ci` label, full releases
+      # 3: PRs with `release-ci` label, full releases
       - name: Set check level
         id: set-level
         # We do not use github.event.pull_request.labels.*.name here because
@@ -175,7 +162,6 @@ jobs:
         run: |
           check_level=0
           fast=false
-          lake_ci=false
 
           if [[ -n "${{ steps.set-release.outputs.RELEASE_TAG }}" || -n "${{ steps.set-release-custom.outputs.RELEASE_TAG }}" ]]; then
             check_level=3
@@ -190,19 +176,13 @@ jobs:
             elif echo "$labels" | grep -q "merge-ci"; then
               check_level=1
             fi
-            if echo "$labels" | grep -q "lake-ci"; then
-              lake_ci=true
-            fi
             if echo "$labels" | grep -q "fast-ci"; then
               fast=true
             fi
           fi
 
-          {
-            echo "check-level=$check_level"
-            echo "fast=$fast"
-            echo "lake-ci=$lake_ci"
-          } >> "$GITHUB_OUTPUT"
+          echo "check-level=$check_level" >> "$GITHUB_OUTPUT"
+          echo "fast=$fast" >> "$GITHUB_OUTPUT"
         env:
           GH_TOKEN: ${{ github.token }}
 
@@ -213,7 +193,6 @@ jobs:
           script: |
             const level = ${{ steps.set-level.outputs.check-level }};
             const fast = ${{ steps.set-level.outputs.fast }};
-            const lakeCi = "${{ steps.set-level.outputs.lake-ci }}" == "true";
             console.log(`level: ${level}, fast: ${fast}`);
             // use large runners where available (original repo)
             let large = ${{ github.repository == 'leanprover/lean4' }};
@@ -266,8 +245,8 @@ jobs:
                 "check-rebootstrap": level >= 1,
                 "check-stage3": level >= 2,
                 "test": true,
-                // NOTE: `test-bench` currently seems to be broken on `ubuntu-latest`
-                "test-bench": large && level >= 2,
+                // NOTE: `test-speedcenter` currently seems to be broken on `ubuntu-latest`
+                "test-speedcenter": large && level >= 2,
                 // We are not warning-free yet on all platforms, start here
                 "CMAKE_OPTIONS": "-DLEAN_EXTRA_CXX_FLAGS=-Werror",
               },
@@ -277,13 +256,11 @@ jobs:
                 "enabled": level >= 2,
                 "test": true,
                 "CMAKE_PRESET": "reldebug",
-                // * `elab_bench/big_do` crashes with exit code 134
-                "CTEST_OPTIONS": "-E 'elab_bench/big_do'",
               },
               {
                 "name": "Linux fsanitize",
                 // Always run on large if available, more reliable regarding timeouts
-                "os": large ? "nscloud-ubuntu-22.04-amd64-16x32-with-cache" : "ubuntu-latest",
+                "os": large ? "nscloud-ubuntu-22.04-amd64-8x16-with-cache" : "ubuntu-latest",
                 "enabled": level >= 2,
                 // do not fail nightlies on this for now
                 "secondary": level <= 2,
@@ -300,7 +277,7 @@ jobs:
                 // * `grind_guide` always times out.
                 // * `pkg/|lake/` tests sometimes time out (likely even hang), related to Lake CI
                 //   failures?
-                "CTEST_OPTIONS": "-E 'StackOverflow|reverse-ffi|interactive|async_select_channel|9366|run/bv_|grind_guide|grind_bitvec2|grind_constProp|grind_indexmap|grind_list|grind_lint|grind_array_attach|grind_ite_trace|pkg/|lake/'"
+                "CTEST_OPTIONS": "-E 'StackOverflow|reverse-ffi|interactive|async_select_channel|9366|run/bv_|grind_guide|pkg/|lake/'"
               },
               {
                 "name": "macOS",
@@ -387,11 +364,6 @@ jobs:
                 job["CMAKE_OPTIONS"] = (job["CMAKE_OPTIONS"] ? job["CMAKE_OPTIONS"] + " " : "") + "-DUSE_LAKE=OFF";
               }
             }
-            if (lakeCi) {
-              for (const job of matrix) {
-                job["CMAKE_OPTIONS"] = (job["CMAKE_OPTIONS"] ? job["CMAKE_OPTIONS"] + " " : "") + "-DLAKE_CI=ON";
-              }
-            }
             console.log(`matrix:\n${JSON.stringify(matrix, null, 2)}`);
             matrix = matrix.filter((job) => job["enabled"]);
             core.setOutput('matrix', matrix.filter((job) => !job["secondary"]));
@@ -503,7 +475,7 @@ jobs:
           git tag "${{ needs.configure.outputs.nightly }}"
           git push nightly "${{ needs.configure.outputs.nightly }}"
           git push -f origin refs/tags/${{ needs.configure.outputs.nightly }}:refs/heads/nightly
-          last_tag="$(git log HEAD^ --simplify-by-decoration --pretty="format:%d" | grep -o "nightly-[^ ,)]*" | head -n 1)"
+          last_tag="$(git log HEAD^ --simplify-by-decoration --pretty="format:%d" | grep -o "nightly-[-0-9]*" | head -n 1)"
           echo -e "*Changes since ${last_tag}:*\n\n" > diff.md
           git show "$last_tag":RELEASES.md > old.md
           #./script/diff_changelogs.py old.md doc/changes.md >> diff.md
@@ -526,18 +498,8 @@ jobs:
           gh workflow -R leanprover/release-index run update-index.yml
         env:
           GITHUB_TOKEN: ${{ secrets.RELEASE_INDEX_TOKEN }}
-      - name: Generate mathlib nightly-testing app token
-        id: mathlib-app-token
-        uses: actions/create-github-app-token@29824e69f54612133e76f7eaac726eef6c875baf # v2.2.1
-        continue-on-error: true
-        with:
-          app-id: ${{ secrets.MATHLIB_NIGHTLY_TESTING_APP_ID }}
-          private-key: ${{ secrets.MATHLIB_NIGHTLY_TESTING_PRIVATE_KEY }}
-          owner: leanprover-community
-          repositories: mathlib4-nightly-testing
       - name: Update toolchain on mathlib4's nightly-testing branch
-        if: steps.mathlib-app-token.outcome == 'success'
         run: |
-          gh workflow -R leanprover-community/mathlib4-nightly-testing run nightly_bump_and_merge.yml
+          gh workflow -R leanprover-community/mathlib4-nightly-testing run nightly_bump_toolchain.yml
         env:
-          GITHUB_TOKEN: ${{ steps.mathlib-app-token.outputs.token }}
+          GITHUB_TOKEN: ${{ secrets.MATHLIB4_BOT }}

.github/workflows/labels-from-comments.yml

@@ -1,5 +1,5 @@
 # This workflow allows any user to add one of the `awaiting-review`, `awaiting-author`, `WIP`,
-# `release-ci`, `lake-ci`, or a `changelog-XXX` label by commenting on the PR or issue.
+# `release-ci`, or a `changelog-XXX` label by commenting on the PR or issue.
 # If any labels from the set {`awaiting-review`, `awaiting-author`, `WIP`} are added, other labels
 # from that set are removed automatically at the same time.
 # Similarly, if any `changelog-XXX` label is added, other `changelog-YYY` labels are removed.
@@ -12,7 +12,7 @@ on:
 
 jobs:
   update-label:
-    if: github.event.issue.pull_request != null && (contains(github.event.comment.body, 'awaiting-review') || contains(github.event.comment.body, 'awaiting-author') || contains(github.event.comment.body, 'WIP') || contains(github.event.comment.body, 'release-ci') || contains(github.event.comment.body, 'lake-ci') || contains(github.event.comment.body, 'changelog-'))
+    if: github.event.issue.pull_request != null && (contains(github.event.comment.body, 'awaiting-review') || contains(github.event.comment.body, 'awaiting-author') || contains(github.event.comment.body, 'WIP') || contains(github.event.comment.body, 'release-ci') || contains(github.event.comment.body, 'changelog-'))
     runs-on: ubuntu-latest
 
     steps:
@@ -28,7 +28,6 @@ jobs:
           const awaitingAuthor = commentLines.includes('awaiting-author');
           const wip = commentLines.includes('WIP');
           const releaseCI = commentLines.includes('release-ci');
-          const lakeCI = commentLines.includes('lake-ci');
           const changelogMatch = commentLines.find(line => line.startsWith('changelog-'));
 
           if (awaitingReview || awaitingAuthor || wip) {
@@ -50,9 +49,6 @@ jobs:
           if (releaseCI) {
             await github.rest.issues.addLabels({ owner, repo, issue_number, labels: ['release-ci'] });
           }
-          if (lakeCI) {
-            await github.rest.issues.addLabels({ owner, repo, issue_number, labels: ['lake-ci'] });
-          }
 
           if (changelogMatch) {
             const changelogLabel = changelogMatch.trim();

.github/workflows/pr-body.yml

@@ -2,23 +2,17 @@ name: Check PR body for changelog convention
 
 on:
   merge_group:
-  pull_request_target:
+  pull_request:
     types: [opened, synchronize, reopened, edited, labeled, converted_to_draft, ready_for_review]
 
-permissions:
-  pull-requests: read
-
 jobs:
   check-pr-body:
     runs-on: ubuntu-latest
     steps:
       - name: Check PR body
-        if: github.event_name == 'pull_request_target'
+        if: github.event_name == 'pull_request'
         uses: actions/github-script@v8
         with:
-          # Safety note: this uses pull_request_target, so the workflow has elevated privileges.
-          # The PR title and body are only used in regex tests (read-only string matching),
-          # never interpolated into shell commands, eval'd, or written to GITHUB_ENV/GITHUB_OUTPUT.
           script: |
             const { title, body, labels, draft } = context.payload.pull_request;
             if (!draft && /^(feat|fix):/.test(title) && !labels.some(label => label.name == "changelog-no")) {

.github/workflows/pr-release.yml

@@ -170,18 +170,6 @@ jobs:
         if: ${{ steps.workflow-info.outputs.pullRequestNumber != '' }}
         uses: dcarbone/install-jq-action@v3.2.0
 
-      # Generate a token for posting comments to Lean PRs about mathlib compatibility.
-      # This app is in the leanprover org and installed on leanprover/lean4.
-      - name: Generate GitHub App token for Lean PR comments
-        if: ${{ steps.workflow-info.outputs.pullRequestNumber != '' }}
-        id: mathlib-comment-token
-        uses: actions/create-github-app-token@3ff1caaa28b64c9cc276ce0a02e2ff584f3900c5 # v2.0.2
-        with:
-          app-id: ${{ secrets.MATHLIB_LEAN_PR_TESTING_APP_ID }}
-          private-key: ${{ secrets.MATHLIB_LEAN_PR_TESTING_PRIVATE_KEY }}
-          owner: leanprover
-          repositories: lean4
-
       # Check that the most recently nightly coincides with 'git merge-base HEAD master'
       - name: Check merge-base and nightly-testing-YYYY-MM-DD for Mathlib/Batteries
         if: ${{ steps.workflow-info.outputs.pullRequestNumber != '' }}
@@ -216,9 +204,8 @@ jobs:
 
           if [[ -n "$MESSAGE" ]]; then
             # Check if force-mathlib-ci label is present
-            # Use GITHUB_TOKEN for read-only label fetch (MATHLIB4_COMMENT_BOT is only for posting comments)
             LABELS="$(curl --retry 3 --location --silent \
-                          -H "Authorization: token ${{ secrets.GITHUB_TOKEN }}" \
+                          -H "Authorization: token ${{ secrets.MATHLIB4_COMMENT_BOT }}" \
                           -H "Accept: application/vnd.github.v3+json" \
                           "https://api.github.com/repos/leanprover/lean4/issues/${{ steps.workflow-info.outputs.pullRequestNumber }}/labels" \
                           | jq -r '.[].name')"
@@ -239,10 +226,10 @@ jobs:
 
             # Use GitHub API to check if a comment already exists
             existing_comment="$(curl --retry 3 --location --silent \
-                                    -H "Authorization: token ${{ steps.mathlib-comment-token.outputs.token }}" \
+                                    -H "Authorization: token ${{ secrets.MATHLIB4_COMMENT_BOT }}" \
                                     -H "Accept: application/vnd.github.v3+json" \
                                     "https://api.github.com/repos/leanprover/lean4/issues/${{ steps.workflow-info.outputs.pullRequestNumber }}/comments" \
-                                    | jq 'first(.[] | select(.body | test("^- . Mathlib") or startswith("Mathlib CI status")) | select(.user.login == "mathlib-lean-pr-testing[bot]"))')"
+                                    | jq 'first(.[] | select(.body | test("^- . Mathlib") or startswith("Mathlib CI status")) | select(.user.login == "leanprover-community-bot"))')"
             existing_comment_id="$(echo "$existing_comment" | jq -r .id)"
             existing_comment_body="$(echo "$existing_comment" | jq -r .body)"
 
@@ -252,14 +239,14 @@ jobs:
               echo "Posting message to the comments: $MESSAGE"
 
               # Append new result to the existing comment or post a new comment
-              # Use the mathlib-lean-pr-testing app token so Mathlib CI can subsequently edit the comment.
+              # It's essential we use the MATHLIB4_COMMENT_BOT token here, so that Mathlib CI can subsequently edit the comment.
               if [ -z "$existing_comment_id" ]; then
                 INTRO="Mathlib CI status ([docs](https://leanprover-community.github.io/contribute/tags_and_branches.html)):"
                 # Post new comment with a bullet point
                 echo "Posting as new comment at leanprover/lean4/issues/${{ steps.workflow-info.outputs.pullRequestNumber }}/comments"
                 curl -L -s \
                   -X POST \
-                  -H "Authorization: token ${{ steps.mathlib-comment-token.outputs.token }}" \
+                  -H "Authorization: token ${{ secrets.MATHLIB4_COMMENT_BOT }}" \
                   -H "Accept: application/vnd.github.v3+json" \
                   -d "$(jq --null-input --arg intro "$INTRO" --arg val "$MESSAGE" '{"body":($intro + "\n" + $val)}')" \
                   "https://api.github.com/repos/leanprover/lean4/issues/${{ steps.workflow-info.outputs.pullRequestNumber }}/comments"
@@ -268,7 +255,7 @@ jobs:
                 echo "Appending to existing comment at leanprover/lean4/issues/${{ steps.workflow-info.outputs.pullRequestNumber }}/comments"
                 curl -L -s \
                   -X PATCH \
-                  -H "Authorization: token ${{ steps.mathlib-comment-token.outputs.token }}" \
+                  -H "Authorization: token ${{ secrets.MATHLIB4_COMMENT_BOT }}" \
                   -H "Accept: application/vnd.github.v3+json" \
                   -d "$(jq --null-input --arg existing "$existing_comment_body" --arg message "$MESSAGE" '{"body":($existing + "\n" + $message)}')" \
                   "https://api.github.com/repos/leanprover/lean4/issues/comments/$existing_comment_id"

.github/workflows/restart-on-label.yml

@@ -7,7 +7,7 @@ on:
 jobs:
   restart-on-label:
     runs-on: ubuntu-latest
-    if: contains(github.event.label.name, 'merge-ci') || contains(github.event.label.name, 'release-ci') || contains(github.event.label.name, 'lake-ci')
+    if: contains(github.event.label.name, 'merge-ci') || contains(github.event.label.name, 'release-ci')
     steps:
     - run: |
         # Finding latest CI workflow run on current pull request

.gitignore

@@ -1,6 +1,7 @@
 *~
 \#*
 .#*
+*.lock
 .lake
 lake-manifest.json
 /build
@@ -17,12 +18,8 @@ compile_commands.json
 *.idea
 tasks.json
 settings.json
-!.claude/settings.json
 .gdb_history
 .vscode/*
-!.vscode/settings.json
-!.vscode/tasks.json
-!.vscode/extensions.json
 script/__pycache__
 *.produced.out
 CMakeSettings.json

.vscode/extensions.json

@@ -1,5 +0,0 @@
-{
-	"recommendations": [
-		"leanprover.lean4"
-	]
-}

.vscode/settings.json

@@ -1,12 +0,0 @@
-{
-	"files.insertFinalNewline": true,
-	"files.trimTrailingWhitespace": true,
-	// These require the CMake Tools extension (ms-vscode.cmake-tools).
-	"cmake.buildDirectory": "${workspaceFolder}/build/release",
-	"cmake.generator": "Unix Makefiles",
-	"[lean4]": {
-		"editor.rulers": [
-			100
-		]
-	}
-}

.vscode/tasks.json

@@ -1,34 +0,0 @@
-{
-	"version": "2.0.0",
-	"tasks": [
-		{
-			"label": "build",
-			"type": "shell",
-			"command": "make -C build/release -j$(nproc 2>/dev/null || sysctl -n hw.logicalcpu 2>/dev/null || echo 4)",
-			"problemMatcher": [],
-			"group": {
-				"kind": "build",
-				"isDefault": true
-			}
-		},
-		{
-			"label": "build-old",
-			"type": "shell",
-			"command": "make -C build/release -j$(nproc 2>/dev/null || sysctl -n hw.logicalcpu 2>/dev/null || echo 4) LAKE_EXTRA_ARGS=--old",
-			"problemMatcher": [],
-			"group": {
-				"kind": "build"
-			}
-		},
-		{
-			"label": "test",
-			"type": "shell",
-			"command": "NPROC=$(nproc 2>/dev/null || sysctl -n hw.logicalcpu 2>/dev/null || echo 4); CTEST_OUTPUT_ON_FAILURE=1 make -C build/release test -j$NPROC ARGS=\"-j$NPROC\"",
-			"problemMatcher": [],
-			"group": {
-				"kind": "test",
-				"isDefault": true
-			}
-		}
-	]
-}

CMakeLists.txt

@@ -1,8 +1,4 @@
-cmake_minimum_required(VERSION 3.21)
-
-if(NOT CMAKE_GENERATOR MATCHES "Makefiles")
-  message(FATAL_ERROR "Only makefile generators are supported")
-endif()
+cmake_minimum_required(VERSION 3.11)
 
 option(USE_MIMALLOC "use mimalloc" ON)
 
@@ -41,7 +37,7 @@ if(NOT (DEFINED STAGE0_CMAKE_EXECUTABLE_SUFFIX))
   set(STAGE0_CMAKE_EXECUTABLE_SUFFIX "${CMAKE_EXECUTABLE_SUFFIX}")
 endif()
 
-# Don't do anything with cadical/leantar on wasm
+# Don't do anything with cadical on wasm
 if(NOT CMAKE_SYSTEM_NAME MATCHES "Emscripten")
   find_program(CADICAL cadical)
   if(NOT CADICAL)
@@ -74,48 +70,16 @@ if(NOT CMAKE_SYSTEM_NAME MATCHES "Emscripten")
       BUILD_IN_SOURCE ON
       INSTALL_COMMAND ""
     )
-    set(CADICAL ${CMAKE_BINARY_DIR}/cadical/cadical${CMAKE_EXECUTABLE_SUFFIX})
+    set(
+      CADICAL
+      ${CMAKE_BINARY_DIR}/cadical/cadical${CMAKE_EXECUTABLE_SUFFIX}
+      CACHE FILEPATH
+      "path to cadical binary"
+      FORCE
+    )
     list(APPEND EXTRA_DEPENDS cadical)
   endif()
-  find_program(LEANTAR leantar)
-  if(NOT LEANTAR)
-    set(LEANTAR_VERSION v0.1.19)
-    if(CMAKE_SYSTEM_NAME MATCHES "Windows")
-      set(LEANTAR_ARCHIVE_SUFFIX .zip)
-      set(LEANTAR_TARGET x86_64-pc-windows-msvc)
-    else()
-      set(LEANTAR_ARCHIVE_SUFFIX .tar.gz)
-      if(CMAKE_SYSTEM_PROCESSOR MATCHES "arm64")
-        set(LEANTAR_TARGET_ARCH aarch64)
-      else()
-        set(LEANTAR_TARGET_ARCH x86_64)
-      endif()
-      if(CMAKE_SYSTEM_NAME MATCHES "Darwin")
-        set(LEANTAR_TARGET_OS apple-darwin)
-      else()
-        set(LEANTAR_TARGET_OS unknown-linux-musl)
-      endif()
-      set(LEANTAR_TARGET ${LEANTAR_TARGET_ARCH}-${LEANTAR_TARGET_OS})
-    endif()
-    set(
-      LEANTAR
-      ${CMAKE_BINARY_DIR}/leantar/leantar-${LEANTAR_VERSION}-${LEANTAR_TARGET}/leantar${CMAKE_EXECUTABLE_SUFFIX}
-    )
-    if(NOT EXISTS "${LEANTAR}")
-      file(
-        DOWNLOAD
-          https://github.com/digama0/leangz/releases/download/${LEANTAR_VERSION}/leantar-${LEANTAR_VERSION}-${LEANTAR_TARGET}${LEANTAR_ARCHIVE_SUFFIX}
-        ${CMAKE_BINARY_DIR}/leantar${LEANTAR_ARCHIVE_SUFFIX}
-      )
-      file(
-        ARCHIVE_EXTRACT
-        INPUT ${CMAKE_BINARY_DIR}/leantar${LEANTAR_ARCHIVE_SUFFIX}
-        DESTINATION ${CMAKE_BINARY_DIR}/leantar
-      )
-    endif()
-  endif()
-  list(APPEND STAGE0_ARGS -DLEANTAR=${LEANTAR})
-  list(APPEND CL_ARGS -DCADICAL=${CADICAL} -DLEANTAR=${LEANTAR})
+  list(APPEND CL_ARGS -DCADICAL=${CADICAL})
 endif()
 
 if(USE_MIMALLOC)
@@ -189,7 +153,6 @@ ExternalProject_Add(
   INSTALL_COMMAND ""
   DEPENDS stage2
   EXCLUDE_FROM_ALL ON
-  STEP_TARGETS configure
 )
 
 # targets forwarded to appropriate stages
@@ -200,25 +163,6 @@ add_custom_target(update-stage0-commit COMMAND $(MAKE) -C stage1 update-stage0-c
 
 add_custom_target(test COMMAND $(MAKE) -C stage1 test DEPENDS stage1)
 
-add_custom_target(
-  bench
-  COMMAND $(MAKE) -C stage2
-  COMMAND $(MAKE) -C stage2 -j1 bench
-  DEPENDS stage2
-)
-add_custom_target(
-  bench-part1
-  COMMAND $(MAKE) -C stage2
-  COMMAND $(MAKE) -C stage2 -j1 bench-part1
-  DEPENDS stage2
-)
-add_custom_target(
-  bench-part2
-  COMMAND $(MAKE) -C stage2
-  COMMAND $(MAKE) -C stage2 -j1 bench-part2
-  DEPENDS stage2
-)
-
 add_custom_target(clean-stdlib COMMAND $(MAKE) -C stage1 clean-stdlib DEPENDS stage1)
 
 install(CODE "execute_process(COMMAND make -C stage1 install)")

CMakePresets.json

@@ -41,7 +41,7 @@
         "SMALL_ALLOCATOR": "OFF",
         "USE_MIMALLOC": "OFF",
         "BSYMBOLIC": "OFF",
-        "LEAN_TEST_VARS": "MAIN_STACK_SIZE=16000 TEST_STACK_SIZE=16000 LSAN_OPTIONS=max_leaks=10"
+        "LEAN_TEST_VARS": "MAIN_STACK_SIZE=16000 LSAN_OPTIONS=max_leaks=10"
       },
       "generator": "Unix Makefiles",
       "binaryDir": "${sourceDir}/build/sanitize"

CONTRIBUTING.md

@@ -7,7 +7,7 @@ Helpful links
 -------
 
 * [Development Setup](./doc/dev/index.md)
-* [Testing](./tests/README.md)
+* [Testing](./doc/dev/testing.md)
 * [Commit convention](./doc/dev/commit_convention.md)
 
 Before You Submit a Pull Request (PR):

LICENSES

@@ -1370,208 +1370,4 @@ FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.
-==============================================================================
-leantar is by Mario Carneiro and distributed under the Apache 2.0 License:
-==============================================================================
-                                 Apache License
-                           Version 2.0, January 2004
-                        http://www.apache.org/licenses/
-
-   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
-
-   1. Definitions.
-
-      "License" shall mean the terms and conditions for use, reproduction,
-      and distribution as defined by Sections 1 through 9 of this document.
-
-      "Licensor" shall mean the copyright owner or entity authorized by
-      the copyright owner that is granting the License.
-
-      "Legal Entity" shall mean the union of the acting entity and all
-      other entities that control, are controlled by, or are under common
-      control with that entity. For the purposes of this definition,
-      "control" means (i) the power, direct or indirect, to cause the
-      direction or management of such entity, whether by contract or
-      otherwise, or (ii) ownership of fifty percent (50%) or more of the
-      outstanding shares, or (iii) beneficial ownership of such entity.
-
-      "You" (or "Your") shall mean an individual or Legal Entity
-      exercising permissions granted by this License.
-
-      "Source" form shall mean the preferred form for making modifications,
-      including but not limited to software source code, documentation
-      source, and configuration files.
-
-      "Object" form shall mean any form resulting from mechanical
-      transformation or translation of a Source form, including but
-      not limited to compiled object code, generated documentation,
-      and conversions to other media types.
-
-      "Work" shall mean the work of authorship, whether in Source or
-      Object form, made available under the License, as indicated by a
-      copyright notice that is included in or attached to the work
-      (an example is provided in the Appendix below).
-
-      "Derivative Works" shall mean any work, whether in Source or Object
-      form, that is based on (or derived from) the Work and for which the
-      editorial revisions, annotations, elaborations, or other modifications
-      represent, as a whole, an original work of authorship. For the purposes
-      of this License, Derivative Works shall not include works that remain
-      separable from, or merely link (or bind by name) to the interfaces of,
-      the Work and Derivative Works thereof.
-
-      "Contribution" shall mean any work of authorship, including
-      the original version of the Work and any modifications or additions
-      to that Work or Derivative Works thereof, that is intentionally
-      submitted to Licensor for inclusion in the Work by the copyright owner
-      or by an individual or Legal Entity authorized to submit on behalf of
-      the copyright owner. For the purposes of this definition, "submitted"
-      means any form of electronic, verbal, or written communication sent
-      to the Licensor or its representatives, including but not limited to
-      communication on electronic mailing lists, source code control systems,
-      and issue tracking systems that are managed by, or on behalf of, the
-      Licensor for the purpose of discussing and improving the Work, but
-      excluding communication that is conspicuously marked or otherwise
-      designated in writing by the copyright owner as "Not a Contribution."
-
-      "Contributor" shall mean Licensor and any individual or Legal Entity
-      on behalf of whom a Contribution has been received by Licensor and
-      subsequently incorporated within the Work.
-
-   2. Grant of Copyright License. Subject to the terms and conditions of
-      this License, each Contributor hereby grants to You a perpetual,
-      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
-      copyright license to reproduce, prepare Derivative Works of,
-      publicly display, publicly perform, sublicense, and distribute the
-      Work and such Derivative Works in Source or Object form.
-
-   3. Grant of Patent License. Subject to the terms and conditions of
-      this License, each Contributor hereby grants to You a perpetual,
-      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
-      (except as stated in this section) patent license to make, have made,
-      use, offer to sell, sell, import, and otherwise transfer the Work,
-      where such license applies only to those patent claims licensable
-      by such Contributor that are necessarily infringed by their
-      Contribution(s) alone or by combination of their Contribution(s)
-      with the Work to which such Contribution(s) was submitted. If You
-      institute patent litigation against any entity (including a
-      cross-claim or counterclaim in a lawsuit) alleging that the Work
-      or a Contribution incorporated within the Work constitutes direct
-      or contributory patent infringement, then any patent licenses
-      granted to You under this License for that Work shall terminate
-      as of the date such litigation is filed.
-
-   4. Redistribution. You may reproduce and distribute copies of the
-      Work or Derivative Works thereof in any medium, with or without
-      modifications, and in Source or Object form, provided that You
-      meet the following conditions:
-
-      (a) You must give any other recipients of the Work or
-          Derivative Works a copy of this License; and
-
-      (b) You must cause any modified files to carry prominent notices
-          stating that You changed the files; and
-
-      (c) You must retain, in the Source form of any Derivative Works
-          that You distribute, all copyright, patent, trademark, and
-          attribution notices from the Source form of the Work,
-          excluding those notices that do not pertain to any part of
-          the Derivative Works; and
-
-      (d) If the Work includes a "NOTICE" text file as part of its
-          distribution, then any Derivative Works that You distribute must
-          include a readable copy of the attribution notices contained
-          within such NOTICE file, excluding those notices that do not
-          pertain to any part of the Derivative Works, in at least one
-          of the following places: within a NOTICE text file distributed
-          as part of the Derivative Works; within the Source form or
-          documentation, if provided along with the Derivative Works; or,
-          within a display generated by the Derivative Works, if and
-          wherever such third-party notices normally appear. The contents
-          of the NOTICE file are for informational purposes only and
-          do not modify the License. You may add Your own attribution
-          notices within Derivative Works that You distribute, alongside
-          or as an addendum to the NOTICE text from the Work, provided
-          that such additional attribution notices cannot be construed
-          as modifying the License.
-
-      You may add Your own copyright statement to Your modifications and
-      may provide additional or different license terms and conditions
-      for use, reproduction, or distribution of Your modifications, or
-      for any such Derivative Works as a whole, provided Your use,
-      reproduction, and distribution of the Work otherwise complies with
-      the conditions stated in this License.
-
-   5. Submission of Contributions. Unless You explicitly state otherwise,
-      any Contribution intentionally submitted for inclusion in the Work
-      by You to the Licensor shall be under the terms and conditions of
-      this License, without any additional terms or conditions.
-      Notwithstanding the above, nothing herein shall supersede or modify
-      the terms of any separate license agreement you may have executed
-      with Licensor regarding such Contributions.
-
-   6. Trademarks. This License does not grant permission to use the trade
-      names, trademarks, service marks, or product names of the Licensor,
-      except as required for reasonable and customary use in describing the
-      origin of the Work and reproducing the content of the NOTICE file.
-
-   7. Disclaimer of Warranty. Unless required by applicable law or
-      agreed to in writing, Licensor provides the Work (and each
-      Contributor provides its Contributions) on an "AS IS" BASIS,
-      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
-      implied, including, without limitation, any warranties or conditions
-      of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
-      PARTICULAR PURPOSE. You are solely responsible for determining the
-      appropriateness of using or redistributing the Work and assume any
-      risks associated with Your exercise of permissions under this License.
-
-   8. Limitation of Liability. In no event and under no legal theory,
-      whether in tort (including negligence), contract, or otherwise,
-      unless required by applicable law (such as deliberate and grossly
-      negligent acts) or agreed to in writing, shall any Contributor be
-      liable to You for damages, including any direct, indirect, special,
-      incidental, or consequential damages of any character arising as a
-      result of this License or out of the use or inability to use the
-      Work (including but not limited to damages for loss of goodwill,
-      work stoppage, computer failure or malfunction, or any and all
-      other commercial damages or losses), even if such Contributor
-      has been advised of the possibility of such damages.
-
-   9. Accepting Warranty or Additional Liability. While redistributing
-      the Work or Derivative Works thereof, You may choose to offer,
-      and charge a fee for, acceptance of support, warranty, indemnity,
-      or other liability obligations and/or rights consistent with this
-      License. However, in accepting such obligations, You may act only
-      on Your own behalf and on Your sole responsibility, not on behalf
-      of any other Contributor, and only if You agree to indemnify,
-      defend, and hold each Contributor harmless for any liability
-      incurred by, or claims asserted against, such Contributor by reason
-      of your accepting any such warranty or additional liability.
-
-   END OF TERMS AND CONDITIONS
-
-   APPENDIX: How to apply the Apache License to your work.
-
-      To apply the Apache License to your work, attach the following
-      boilerplate notice, with the fields enclosed by brackets "[]"
-      replaced with your own identifying information. (Don't include
-      the brackets!)  The text should be enclosed in the appropriate
-      comment syntax for the file format. We also recommend that a
-      file or class name and description of purpose be included on the
-      same "printed page" as the copyright notice for easier
-      identification within third-party archives.
-
-   Copyright [yyyy] [name of copyright owner]
-
-   Licensed under the Apache License, Version 2.0 (the "License");
-   you may not use this file except in compliance with the License.
-   You may obtain a copy of the License at
-
-       http://www.apache.org/licenses/LICENSE-2.0
-
-   Unless required by applicable law or agreed to in writing, software
-   distributed under the License is distributed on an "AS IS" BASIS,
-   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-   See the License for the specific language governing permissions and
-   limitations under the License.
+SOFTWARE.

doc/.gitignore

@@ -0,0 +1 @@
+out

doc/dev/bootstrap.md

@@ -6,7 +6,7 @@ building Lean itself - which is needed to again build those parts. This cycle is
 broken by using pre-built C files checked into the repository (which ultimately
 go back to a point where the Lean compiler was not written in Lean) in place of
 these Lean inputs and then compiling everything in multiple stages up to a fixed
-point. The build directory is organized into these stages:
+point. The build directory is organized in these stages:
 
 ```bash
 stage0/
@@ -79,7 +79,7 @@ with the contents of `src/stdlib_flags.h`, bringing them back in sync.
 NOTE: A full rebuild of stage 1 will only be triggered when the *committed* contents of `stage0/` are changed.
 Thus if you change files in it manually instead of through `update-stage0-commit` (see below) or fetching updates from git, you either need to commit those changes first or run `make -C build/release clean-stdlib`.
 The same is true for further stages except that a rebuild of them is retriggered on any committed change, not just to a specific directory.
-Thus when debugging e.g. stage 2 failures, you can resume the build from these failures on but you may want to explicitly call `clean-stdlib` to either observe changes from `.olean` files of modules that built successfully or to check that you did not break modules that built successfully at some prior point.
+Thus when debugging e.g. stage 2 failures, you can resume the build from these failures on but may want to explicitly call `clean-stdlib` to either observe changes from `.olean` files of modules that built successfully or to check that you did not break modules that built successfully at some prior point.
 
 If you have write access to the lean4 repository, you can also manually
 trigger that process, for example to be able to use new features in the compiler itself.
@@ -101,7 +101,7 @@ The script `script/rebase-stage0.sh` can be used for that.
 
 The CI should prevent PRs with changes to stage0 (besides `stdlib_flags.h`)
 from entering `master` through the (squashing!) merge queue, and label such PRs
-with the `changes-stage0` label. Such PRs should have a cleaned-up history,
+with the `changes-stage0` label. Such PRs should have a cleaned up history,
 with separate stage0 update commits; then coordinate with the admins to merge
 your PR using rebase merge, bypassing the merge queue.
 

doc/dev/index.md

@@ -1,9 +1,7 @@
 # Development Workflow
 
 If you want to make changes to Lean itself, start by [building Lean](../make/index.md) from a clean checkout to make sure that everything is set up correctly.
-After that, read on below to find out how to set up your editor for changing the Lean source code,
-followed by further sections of the development manual where applicable
-such as on the [test suite](../../tests/README.md) and [commit convention](commit_convention.md).
+After that, read on below to find out how to set up your editor for changing the Lean source code, followed by further sections of the development manual where applicable such as on the [test suite](testing.md) and [commit convention](commit_convention.md).
 
 If you are planning to make any changes that may affect the compilation of Lean itself, e.g. changes to the parser, elaborator, or compiler, you should first read about the [bootstrapping pipeline](bootstrap.md).
 You should not edit the `stage0` directory except using the commands described in that section when necessary.
@@ -63,10 +61,10 @@ you can then put `my_name/lean4:my-tag` in your `lean-toolchain` file in a proje
 
 ### VS Code
 
-There is a `.vscode/` directory that correctly sets up VS Code with settings, tasks, and recommended extensions.
-Simply open the repository folder in VS Code, such as by invoking
+There is a `lean.code-workspace` file that correctly sets up VS Code with workspace roots for the stage0/stage1 setup described above as well as with other settings.
+You should always load it when working on Lean, such as by invoking
 ```
-code .
+code lean.code-workspace
 ```
 on the command line.
 

doc/dev/release_checklist.md

@@ -30,7 +30,7 @@ We'll use `v4.6.0` as the intended release version as a running example.
     run `script/release_notes.py --since v4.5.0` on the `releases/v4.6.0` branch,
     and see the section "Writing the release notes" below for more information.
   - Release notes live in https://github.com/leanprover/reference-manual, in e.g. `Manual/Releases/v4.6.0.lean`.
-    It's best if you update these at the same time as you update the `lean-toolchain` for the `reference-manual` repository, see below.
+    It's best if you update these at the same time as a you update the `lean-toolchain` for the `reference-manual` repository, see below.
 - Go to https://github.com/leanprover/lean4/releases and verify that the `v4.6.0` release appears.
   - Verify on Github that "Set as the latest release" is checked.
 - Next, we will move a curated list of downstream repos to the latest stable release.
@@ -54,7 +54,7 @@ We'll use `v4.6.0` as the intended release version as a running example.
     - `verso`:
       - The `subverso` dependency is unusual in that it needs to be compatible with _every_ Lean release simultaneously.
         Usually you don't need to do anything.
-        If you think something is wrong here, please contact David Thrane Christiansen (@david-christiansen)
+        If you think something is wrong here please contact David Thrane Christiansen (@david-christiansen)
       - Warnings during `lake update` and `lake build` are expected.
     - `reference-manual`: the release notes generated by `script/release_notes.py` as described above must be included in
       `Manual/Releases/v4.6.0.lean`, and `import` and `include` statements adding in `Manual/Releases.lean`. 
@@ -65,14 +65,7 @@ We'll use `v4.6.0` as the intended release version as a running example.
       - The `lakefile.toml` should always refer to dependencies via their `main` or `master` branch,
         not a toolchain tag
         (with the exception of `ProofWidgets4`, which *must* use a sequential version tag).
-      - **Important:** After creating and pushing the ProofWidgets4 tag (see above),
-        the mathlib4 lakefile must be updated to reference the new tag (e.g. `v0.0.87`).
-        The `release_steps.py` script handles this automatically by looking up the latest
-        ProofWidgets4 tag compatible with the target toolchain.
       - Push the PR branch to the main Mathlib repository rather than a fork, or CI may not work reliably
-      - The "Verify Transient and Automated Commits" CI check on toolchain bump PRs can be ignored —
-        it often fails on automated commits (`x:` prefixed) from the nightly-testing history that can't be
-        reproduced in CI. This does not block merging.
     - `repl`:
       There are two copies of `lean-toolchain`/`lakefile.lean`:
       in the root, and in `test/Mathlib/`. Edit both, and run `lake update` in both directories.
@@ -153,9 +146,6 @@ We'll use `v4.7.0-rc1` as the intended release version in this example.
     * The repository does not need any changes to move to the new version.
     * Note that sometimes there are *unreviewed* but necessary changes on the `nightly-testing` branch of the repository.
       If so, you will need to merge these into the `bump_to_v4.7.0-rc1` branch manually.
-    * The `nightly-testing` branch may also contain temporary fix scripts (e.g. `fix_backward_defeq.py`,
-      `fix_deprecations.py`) that were used to adapt to breaking changes during the nightly cycle.
-      These should be reviewed and removed if no longer needed, as they can interfere with CI checks.
   - For each of the repositories listed in `script/release_repos.yml`,
     - Run `script/release_steps.py v4.7.0-rc1 <repo>` (e.g. replacing `<repo>` with `batteries`), which will walk you through the following steps:
       - Create a new branch off `master`/`main` (as specified in the `branch` field), called `bump_to_v4.7.0-rc1`.

doc/dev/testing.md

@@ -0,0 +1,138 @@
+# Test Suite
+
+After [building Lean](../make/index.md) you can run all the tests using
+```
+cd build/release
+make test ARGS=-j4
+```
+Change the 4 to the maximum number of parallel tests you want to
+allow. The best choice is the number of CPU cores on your machine as
+the tests are mostly CPU bound.  You can find the number of processors
+on linux using `nproc` and on Windows it is the `NUMBER_OF_PROCESSORS`
+environment variable.
+
+You can run tests after [building a specific stage](bootstrap.md) by
+adding the `-C stageN` argument. The default when run as above is stage 1.  The
+Lean tests will automatically use that stage's corresponding Lean
+executables
+
+Running `make test` will not pick up new test files; run
+```bash
+cmake build/release/stage1
+```
+to update the list of tests.
+
+You can also use `ctest` directly if you are in the right folder.  So
+to run stage1 tests with a 300 second timeout run this:
+
+```bash
+cd build/release/stage1
+ctest -j 4 --output-on-failure --timeout 300
+```
+Useful `ctest` flags are `-R <name of test>` to run a single test, and
+`--rerun-failed` to run all tests that failed during the last run.
+You can also pass `ctest` flags via `make test ARGS="--rerun-failed"`.
+
+To get verbose output from ctest pass the `--verbose` command line
+option. Test output is normally suppressed and only summary
+information is displayed. This option will show all test output.
+
+## Test Suite Organization
+
+All these tests are included by [src/shell/CMakeLists.txt](https://github.com/leanprover/lean4/blob/master/src/shell/CMakeLists.txt):
+
+- [`tests/lean`](https://github.com/leanprover/lean4/tree/master/tests/lean/): contains tests that come equipped with a
+  .lean.expected.out file. The driver script [`test_single.sh`](https://github.com/leanprover/lean4/tree/master/tests/lean/test_single.sh) runs
+  each test and checks the actual output (*.produced.out) with the
+  checked in expected output.
+
+- [`tests/lean/run`](https://github.com/leanprover/lean4/tree/master/tests/lean/run/): contains tests that are run through the lean
+  command line one file at a time. These tests only look for error
+  codes and do not check the expected output even though output is
+  produced, it is ignored.
+
+  **Note:** Tests in this directory run with `-Dlinter.all=false` to reduce noise.
+  If your test needs to verify linter behavior (e.g., deprecation warnings),
+  explicitly enable the relevant linter with `set_option linter.<name> true`.
+
+- [`tests/lean/interactive`](https://github.com/leanprover/lean4/tree/master/tests/lean/interactive/): are designed to test server requests at a
+  given position in the input file. Each .lean file contains comments
+  that indicate how to simulate a client request at that position.
+  using a `--^` point to the line position. Example:
+    ```lean,ignore
+    open Foo in
+    theorem tst2 (h : a ≤ b) : a + 2 ≤ b + 2 :=
+    Bla.
+      --^ completion
+    ```
+    In this example, the test driver [`test_single.sh`](https://github.com/leanprover/lean4/tree/master/tests/lean/interactive/test_single.sh) will simulate an
+    auto-completion request at `Bla.`. The expected output is stored in
+    a .lean.expected.out in the json format that is part of the
+    [Language Server
+    Protocol](https://microsoft.github.io/language-server-protocol/).
+
+    This can also be used to test the following additional requests:
+    ```
+    --^ textDocument/hover
+    --^ textDocument/typeDefinition
+    --^ textDocument/definition
+    --^ $/lean/plainGoal
+    --^ $/lean/plainTermGoal
+    --^ insert: ...
+    --^ collectDiagnostics
+    ```
+
+- [`tests/lean/server`](https://github.com/leanprover/lean4/tree/master/tests/lean/server/): Tests more of the Lean `--server` protocol.
+  There are just a few of them, and it uses .log files containing
+  JSON.
+
+- [`tests/compiler`](https://github.com/leanprover/lean4/tree/master/tests/compiler/): contains tests that will run the Lean compiler and
+  build an executable that is executed and the output is compared to
+  the .lean.expected.out file. This test also contains a subfolder
+  [`foreign`](https://github.com/leanprover/lean4/tree/master/tests/compiler/foreign/) which shows how to extend Lean using C++.
+
+- [`tests/lean/trust0`](https://github.com/leanprover/lean4/tree/master/tests/lean/trust0): tests that run Lean in a mode that Lean doesn't
+  even trust the .olean files (i.e., trust 0).
+
+- [`tests/bench`](https://github.com/leanprover/lean4/tree/master/tests/bench/): contains performance tests.
+
+- [`tests/plugin`](https://github.com/leanprover/lean4/tree/master/tests/plugin/): tests that compiled Lean code can be loaded into
+  `lean` via the `--plugin` command line option.
+
+## Writing Good Tests
+
+Every test file should contain:
+* an initial `/-! -/` module docstring summarizing the test's purpose
+* a module docstring for each test section that describes what is tested
+  and, if not 100% clear, why that is the desirable behavior
+
+At the time of writing, most tests do not follow these new guidelines yet.
+For an example of a conforming test, see [`tests/lean/1971.lean`](https://github.com/leanprover/lean4/tree/master/tests/lean/1971.lean).
+
+## Fixing Tests
+
+When the Lean source code or the standard library are modified, some of the
+tests break because the produced output is slightly different, and we have
+to reflect the changes in the `.lean.expected.out` files.
+We should not blindly copy the new produced output since we may accidentally
+miss a bug introduced by recent changes.
+The test suite contains commands that allow us to see what changed in a convenient way.
+First, we must install [meld](http://meldmerge.org/). On Ubuntu, we can do it by simply executing
+
+```
+sudo apt-get install meld
+```
+
+Now, suppose `bad_class.lean` test is broken. We can see the problem by going to [`tests/lean`](https://github.com/leanprover/lean4/tree/master/tests/lean) directory and
+executing
+
+```
+./test_single.sh -i bad_class.lean
+```
+
+When the `-i` option is provided, `meld` is automatically invoked
+whenever there is discrepancy between the produced and expected
+outputs. `meld` can also be used to repair the problems.
+
+In Emacs, we can also execute `M-x lean4-diff-test-file` to check/diff the file of the current buffer.
+To mass-copy all `.produced.out` files to the respective `.expected.out` file, use `tests/lean/copy-produced`.

doc/examples/.gitignore

@@ -1,2 +0,0 @@
-*.out.produced
-*.exit.produced

doc/examples/IJCAR2026/README.md

@@ -1,6 +0,0 @@
-# IJCAR 2026: `grind`, An SMT-Inspired Tactic for Lean 4
-
-Ancillary materials for the paper.
-
-- `examples.lean`: interactive examples from the paper
-- `analyze_grind_loc.py`: script used for the evaluation section, analyzing `grind` adoption and lines-of-code changes in Mathlib

doc/examples/IJCAR2026/analyze_grind_loc.py

@@ -1,401 +0,0 @@
-#!/usr/bin/env python3
-"""
-Analyze grind adoption LoC changes in mathlib.
-
-For each theorem/lemma in master that uses grind, find the most recent
-commit where it didn't use grind, and measure the LoC change.
-
-This script was used in preparing the "Evaluation" section of the grind paper.
-"""
-
-import subprocess
-import re
-import csv
-import sys
-from pathlib import Path
-from dataclasses import dataclass
-from concurrent.futures import ThreadPoolExecutor, as_completed
-from typing import Iterator
-from functools import lru_cache
-
-
-@dataclass
-class GrindUsage:
-    file: str
-    line_no: int
-    decl_name: str
-    decl_type: str  # theorem, lemma, def, example, etc.
-
-
-@dataclass
-class LocChange:
-    file: str
-    decl_name: str
-    decl_type: str
-    old_loc: int
-    new_loc: int
-    loc_saved: int
-    commit_sha: str
-    commit_date: str
-
-
-def run_git(args: list[str], repo: str = ".") -> str:
-    """Run a git command and return stdout."""
-    result = subprocess.run(
-        ["git", "-C", repo] + args,
-        capture_output=True, text=True, check=True
-    )
-    return result.stdout
-
-
-def run_git_safe(args: list[str], repo: str = ".") -> str | None:
-    """Run a git command, return None on failure."""
-    result = subprocess.run(
-        ["git", "-C", repo] + args,
-        capture_output=True, text=True
-    )
-    if result.returncode != 0:
-        return None
-    return result.stdout
-
-
-@lru_cache(maxsize=4096)
-def get_file_at_commit(repo: str, commit: str, file_path: str) -> str | None:
-    """Get file contents at a specific commit (cached)."""
-    return run_git_safe(["show", f"{commit}:{file_path}"], repo)
-
-
-def find_grind_usages(repo: str = ".") -> tuple[list[GrindUsage], int, int]:
-    """Find all declarations using grind in current master.
-    Returns (usages, total_grind_calls, grind_in_decls) where:
-    - total_grind_calls is the count of grind tactic calls (after filtering comments/attrs)
-    - grind_in_decls is the count of those that are inside named declarations
-    """
-    # Use git grep to find lines containing 'grind' (excludes lake packages)
-    result = run_git(["grep", "-n", "grind", "master", "--", "Mathlib/"], repo)
-
-    usages = []
-    seen = set()  # (file, decl_name) to dedupe
-    total_grind_calls = 0
-    grind_in_decls = 0
-
-    for line in result.strip().split('\n'):
-        if not line:
-            continue
-        # Format: master:path/to/file.lean:123:line content
-        match = re.match(r'^master:(.+\.lean):(\d+):(.*)$', line)
-        if not match:
-            continue
-
-        file_path, line_no_str, content = match.groups()
-        line_no = int(line_no_str)
-
-        # Skip comments and attributes (not tactic calls)
-        content_stripped = content.strip()
-        if content_stripped.startswith('--') or content_stripped.startswith('/-'):
-            continue
-        if content_stripped.startswith('attribute'):
-            continue
-        if '@[' in content and 'grind' in content:
-            # Could be an attribute like @[grind =], skip
-            if 'by' not in content and ':=' not in content:
-                continue
-
-        total_grind_calls += 1
-
-        # Find the declaration this grind belongs to
-        decl_name, decl_type = find_decl_at_line(repo, file_path, line_no)
-        if decl_name is None:
-            continue
-
-        grind_in_decls += 1
-
-        key = (file_path, decl_name)
-        if key in seen:
-            continue
-        seen.add(key)
-
-        usages.append(GrindUsage(
-            file=file_path,
-            line_no=line_no,
-            decl_name=decl_name,
-            decl_type=decl_type
-        ))
-
-    return usages, total_grind_calls, grind_in_decls
-
-
-def find_decl_at_line(repo: str, file_path: str, grind_line: int) -> tuple[str | None, str | None]:
-    """
-    Find the declaration name and type that contains the grind at the given line.
-    Search backwards from grind_line to find the most recent declaration.
-    """
-    # Get file content at master
-    content = get_file_at_commit(repo, "master", file_path)
-    if content is None:
-        return None, None
-
-    lines = content.split('\n')
-
-    # Search backwards from grind_line for a declaration
-    # Match declarations with optional leading modifiers and attributes
-    decl_pattern = re.compile(r'^(?:@\[.*?\]\s*)*(?:private\s+|protected\s+|noncomputable\s+|scoped\s+)*(theorem|lemma|def|example|instance|abbrev|structure|class)\s+(\w+)')
-
-    for i in range(grind_line - 1, -1, -1):
-        if i >= len(lines):
-            continue
-        line = lines[i]
-        match = decl_pattern.match(line)
-        if match:
-            return match.group(2), match.group(1)
-
-    return None, None
-
-
-def find_grind_introduction_commit(repo: str, file_path: str, decl_name: str) -> str | None:
-    """
-    Find the commit that introduced grind to this declaration.
-    Returns None if the declaration was born with grind.
-    """
-    # First, find the line range of the declaration in master
-    content = get_file_at_commit(repo, "master", file_path)
-    if content is None:
-        return None
-
-    lines = content.split('\n')
-    decl_start = None
-    decl_end = None
-
-    # Find declaration start
-    decl_pattern = re.compile(rf'^(?:@\[.*?\]\s*)*(?:private\s+|protected\s+|noncomputable\s+|scoped\s+)*(theorem|lemma|def|example|instance|abbrev|structure|class)\s+{re.escape(decl_name)}\b')
-    for i, line in enumerate(lines):
-        if decl_pattern.match(line):
-            decl_start = i
-            break
-
-    if decl_start is None:
-        return None
-
-    # Find declaration end (next top-level declaration or EOF)
-    end_patterns = re.compile(r'^(?:private\s+|protected\s+|noncomputable\s+|scoped\s+)*(theorem|lemma|def|example|instance|abbrev|structure|class|namespace|section|end\s|@\[|#|/-)')
-    for i in range(decl_start + 1, len(lines)):
-        line = lines[i]
-        if line and not line[0].isspace() and end_patterns.match(line):
-            decl_end = i
-            break
-    if decl_end is None:
-        decl_end = len(lines)
-
-    # Find grind line within declaration
-    grind_line = None
-    for i in range(decl_start, decl_end):
-        if 'grind' in lines[i]:
-            grind_line = i + 1  # 1-indexed
-            break
-
-    if grind_line is None:
-        return None
-
-    # Use git blame to find when that grind line was added
-    blame_result = run_git_safe(["blame", "-L", f"{grind_line},{grind_line}", "--porcelain", "master", "--", file_path], repo)
-    if blame_result is None:
-        return None
-
-    # First line of porcelain output is the commit SHA
-    first_line = blame_result.split('\n')[0]
-    commit_sha = first_line.split()[0]
-
-    # Check if this declaration existed before this commit (without grind)
-    parent_sha = run_git_safe(["rev-parse", f"{commit_sha}^"], repo)
-    if parent_sha is None:
-        return None  # Initial commit, born with grind
-    parent_sha = parent_sha.strip()
-
-    # Check if declaration existed in parent
-    parent_content = get_file_at_commit(repo, parent_sha, file_path)
-    if parent_content is None:
-        # File didn't exist in parent - might be new file or renamed
-        return None
-
-    # Check if declaration existed and didn't have grind
-    if decl_name not in parent_content:
-        return None  # Declaration didn't exist - born with grind
-
-    # Check if it already had grind in parent
-    parent_lines = parent_content.split('\n')
-    in_decl = False
-    for line in parent_lines:
-        if decl_pattern.match(line):
-            in_decl = True
-        elif in_decl:
-            if line and not line[0].isspace() and end_patterns.match(line):
-                break
-            if 'grind' in line:
-                # Already had grind in parent — not the introduction commit
-                return None
-
-    return commit_sha
-
-
-def extract_proof_loc(repo: str, file_path: str, decl_name: str, commit: str) -> int | None:
-    """
-    Extract the number of lines in a declaration's proof at a given commit.
-    Returns None if the declaration doesn't exist at that commit.
-    """
-    content = get_file_at_commit(repo, commit, file_path)
-    if content is None:
-        return None
-
-    lines = content.split('\n')
-
-    # Find declaration start
-    decl_pattern = re.compile(rf'^(?:@\[.*?\]\s*)*(?:private\s+|protected\s+|noncomputable\s+|scoped\s+)*(theorem|lemma|def|example|instance|abbrev|structure|class)\s+{re.escape(decl_name)}\b')
-    decl_start = None
-    for i, line in enumerate(lines):
-        if decl_pattern.match(line):
-            decl_start = i
-            break
-
-    if decl_start is None:
-        return None
-
-    # Find declaration end
-    end_patterns = re.compile(r'^(?:private\s+|protected\s+|noncomputable\s+|scoped\s+)*(theorem|lemma|def|example|instance|abbrev|structure|class|namespace|section|end\s|@\[|#|/-)')
-    decl_end = None
-    for i in range(decl_start + 1, len(lines)):
-        line = lines[i]
-        if line and not line[0].isspace() and end_patterns.match(line):
-            decl_end = i
-            break
-    if decl_end is None:
-        decl_end = len(lines)
-
-    # Count non-empty lines in declaration
-    loc = sum(1 for i in range(decl_start, decl_end) if lines[i].strip())
-    return loc
-
-
-def get_commit_date(repo: str, sha: str) -> str:
-    """Get the date of a commit."""
-    result = run_git(["log", "-1", "--format=%ci", sha], repo)
-    return result.strip().split()[0]  # Just the date part
-
-
-def analyze_usage_detailed(repo: str, usage: GrindUsage) -> tuple[LocChange | None, str]:
-    """Analyze a single grind usage, returning (result, skip_reason)."""
-    commit = find_grind_introduction_commit(repo, usage.file, usage.decl_name)
-    if commit is None:
-        return None, "born_with_grind"
-
-    parent = run_git_safe(["rev-parse", f"{commit}^"], repo)
-    if parent is None:
-        return None, "no_parent"
-    parent = parent.strip()
-
-    old_loc = extract_proof_loc(repo, usage.file, usage.decl_name, parent)
-    new_loc = extract_proof_loc(repo, usage.file, usage.decl_name, "master")
-
-    if old_loc is None:
-        return None, "old_loc_failed"
-    if new_loc is None:
-        return None, "new_loc_failed"
-
-    commit_date = get_commit_date(repo, commit)
-
-    return LocChange(
-        file=usage.file,
-        decl_name=usage.decl_name,
-        decl_type=usage.decl_type,
-        old_loc=old_loc,
-        new_loc=new_loc,
-        loc_saved=old_loc - new_loc,
-        commit_sha=commit[:12],
-        commit_date=commit_date
-    ), "success"
-
-
-def main(repo: str = "."):
-    print("Finding grind usages in master...", file=sys.stderr)
-    usages, total_grind_calls, grind_in_decls = find_grind_usages(repo)
-    print(f"Found {len(usages)} declarations using grind ({grind_in_decls}/{total_grind_calls} grind calls)", file=sys.stderr)
-
-    print("Analyzing git history (this may take a while)...", file=sys.stderr)
-    results: list[LocChange] = []
-    skip_reasons: dict[str, int] = {}
-
-    with ThreadPoolExecutor(max_workers=64) as executor:
-        futures = {executor.submit(analyze_usage_detailed, repo, usage): usage for usage in usages}
-
-        for i, future in enumerate(as_completed(futures)):
-            if (i + 1) % 50 == 0:
-                print(f"  Progress: {i + 1}/{len(usages)}", file=sys.stderr, flush=True)
-
-            result, reason = future.result()
-            if result:
-                results.append(result)
-            else:
-                skip_reasons[reason] = skip_reasons.get(reason, 0) + 1
-
-    total_skipped = sum(skip_reasons.values())
-    print(f"\nAnalyzed {len(results)} declarations, skipped {total_skipped}:", file=sys.stderr)
-    for reason, count in sorted(skip_reasons.items(), key=lambda x: -x[1]):
-        print(f"  - {reason}: {count}", file=sys.stderr)
-
-    # Sort by LoC saved (descending)
-    results.sort(key=lambda r: r.loc_saved, reverse=True)
-
-    # Output CSV
-    writer = csv.writer(sys.stdout)
-    writer.writerow(["file", "declaration", "type", "old_loc", "new_loc", "loc_saved", "commit", "date"])
-    for r in results:
-        writer.writerow([r.file, r.decl_name, r.decl_type, r.old_loc, r.new_loc, r.loc_saved, r.commit_sha, r.commit_date])
-
-    # Summary stats to stderr
-    total_old = sum(r.old_loc for r in results) if results else 0
-    total_new = sum(r.new_loc for r in results) if results else 0
-    total_saved = sum(r.loc_saved for r in results) if results else 0
-    avg_saved = total_saved / len(results) if results else 0
-
-    print("\n" + "=" * 60, file=sys.stderr)
-    print("GRIND ADOPTION LOC ANALYSIS", file=sys.stderr)
-    print("=" * 60, file=sys.stderr)
-
-    print("\n## Declaration Counts\n", file=sys.stderr)
-    print(f"  Total grind tactic calls:         {total_grind_calls}", file=sys.stderr)
-    print(f"  In named declarations:            {grind_in_decls} ({total_grind_calls - grind_in_decls} in anonymous/other)", file=sys.stderr)
-    print(f"  Unique declarations:              {len(usages)}", file=sys.stderr)
-    print(f"  Converted to grind:               {len(results)}", file=sys.stderr)
-    print(f"  Born with grind:                  {skip_reasons.get('born_with_grind', 0)}", file=sys.stderr)
-    if skip_reasons.get('old_loc_failed', 0) > 0:
-        print(f"  Could not trace history:          {skip_reasons.get('old_loc_failed', 0)}", file=sys.stderr)
-
-    print("\n## Lines of Code Impact\n", file=sys.stderr)
-    print(f"  Total LoC before grind:           {total_old}", file=sys.stderr)
-    print(f"  Total LoC after grind:            {total_new}", file=sys.stderr)
-    print(f"  Total LoC saved:                  {total_saved}", file=sys.stderr)
-    print(f"  Average LoC saved per theorem:    {avg_saved:.1f}", file=sys.stderr)
-    big_savings = sum(1 for r in results if r.loc_saved >= 10)
-    print(f"  Declarations shrunk by 10+ lines: {big_savings}", file=sys.stderr)
-
-    if results:
-        print("\n## Top 10 Biggest LoC Savings\n", file=sys.stderr)
-        for r in results[:10]:
-            print(f"  {r.loc_saved:+4d} lines: {r.decl_name} ({r.file})", file=sys.stderr)
-
-        # Show any that got bigger (negative savings)
-        got_bigger = [r for r in results if r.loc_saved < 0]
-        if got_bigger:
-            print(f"\n## Declarations That Got Bigger ({len(got_bigger)} total)\n", file=sys.stderr)
-            print("  (showing 5 worst):", file=sys.stderr)
-            for r in got_bigger[-5:]:  # Show worst 5
-                print(f"  {r.loc_saved:+4d} lines: {r.decl_name} ({r.file})", file=sys.stderr)
-
-    print("\n" + "=" * 60, file=sys.stderr)
-
-
-if __name__ == "__main__":
-    import argparse
-    parser = argparse.ArgumentParser(description="Analyze grind LoC savings")
-    parser.add_argument("--repo", "-r", default=".", help="Repository path")
-    args = parser.parse_args()
-    main(args.repo)

doc/examples/IJCAR2026/examples.lean

@@ -1,127 +0,0 @@
-/- Examples from the paper "grind: An SMT-Inspired Tactic for Lean 4" -/
-open Lean Grind
-
-/- Congruence closure. -/
-
-example (f : Nat → Nat) (h : a = b) : f (f b) = f (f a) := by grind
-
-/-
-E-matching.
-
-Any `f` that is the left inverse of `g` would work on this example.
--/
-def f (x : Nat) := x - 1
-def g (x : Nat) := x + 1
-
-@[grind =] theorem fg : f (g x) = x := by simp [f, g]
-example : f a = b → a = g c → b = c := by grind
-
-/-
-Any `R` that is transitive and symmetric would work on this example.
--/
-def R : Nat → Nat → Prop := (· % 7 = · % 7)
-@[grind →] theorem Rtrans : R x y → R y z → R x z := by grind [R]
-@[grind →] theorem Rsymm  : R x y → R y x := by grind [R]
-example : R a b → R c b → R d c → R a d := by grind
-
-/- Big step operational semantics example. -/
-
-abbrev Variable := String
-def State := Variable → Nat
-inductive Stmt : Type where
-  | skip : Stmt
-  | assign : Variable → (State → Nat) → Stmt
-  | seq : Stmt → Stmt → Stmt
-  | ifThenElse : (State → Prop) → Stmt → Stmt → Stmt
-  | whileDo : (State → Prop) → Stmt → Stmt
-infix:60 ";; " => Stmt.seq
-export Stmt (skip assign seq ifThenElse whileDo)
-set_option quotPrecheck false in
-notation s:70 "[" x:70 "↦" n:70 "]" => (fun v ↦ if v = x then n else s v)
-inductive BigStep : Stmt → State → State → Prop where
-  | skip (s : State) : BigStep skip s s
-  | assign (x : Variable) (a : State → Nat) (s : State) : BigStep (assign x a) s (s[x ↦ a s])
-  | seq {S T : Stmt} {s t u : State} (hS : BigStep S s t) (hT : BigStep T t u) :
-    BigStep (S;; T) s u
-  | if_true {B : State → Prop} {s t : State} (hcond : B s) (S T : Stmt) (hbody : BigStep S s t) :
-    BigStep (ifThenElse B S T) s t
-  | if_false {B : State → Prop} {s t : State} (hcond : ¬ B s) (S T : Stmt) (hbody : BigStep T s t) :
-    BigStep (ifThenElse B S T) s t
-  | while_true {B S s t u} (hcond : B s) (hbody : BigStep S s t) (hrest : BigStep (whileDo B S) t u) :
-    BigStep (whileDo B S) s u
-  | while_false {B S s} (hcond : ¬ B s) : BigStep (whileDo B S) s s
-notation:55 "(" S:55 "," s:55 ")" " ==> " t:55 => BigStep S s t
-
-example {B S T s t} (hcond : B s) : (ifThenElse B S T, s) ==> t → (S, s) ==> t := by
-  grind [cases BigStep]
-
-theorem cases_if_of_true {B S T s t} (hcond : B s) : (ifThenElse B S T, s) ==> t → (S, s) ==> t := by
-  grind [cases BigStep]
-
-theorem cases_if_of_false {B S T s t} (hcond : ¬ B s) : (ifThenElse B S T, s) ==> t → (T, s) ==> t := by
-  grind [cases BigStep]
-
-example {B S T s t} : (ifThenElse B S T, s) ==> t ↔ (B s ∧ (S, s) ==> t) ∨ (¬ B s ∧ (T, s) ==> t) := by
-  grind [BigStep] -- shortcut for `cases BigStep` and `intro BigStep`
-
-attribute [grind] BigStep
-theorem if_iff {B S T s t} : (ifThenElse B S T, s) ==>
-    t ↔ (B s ∧ (S, s) ==> t) ∨ (¬ B s ∧ (T, s) ==> t) := by grind
-
-/- Dependent pattern matching. -/
-
-inductive Vec (α : Type u) : Nat → Type u
-  | nil : Vec α 0
-  | cons : α → Vec α n → Vec α (n+1)
-@[grind =] def Vec.head : Vec α (n+1) → α
-  | .cons a _ => a
-example (as bs : Vec Int (n+1)) : as.head = bs.head
-    → (match as, bs with
-       | .cons a _, .cons b _ => a + b) = 2 * as.head := by grind
-
-/- Theory solvers. -/
-
-example [CommRing α] (a b c : α) :
-    a + b + c = 3 →
-    a^2 + b^2 + c^2 = 5 →
-    a^3 + b^3 + c^3 = 7 →
-    a^4 + b^4 + c^4 = 9 := by grind
-
-example (x : BitVec 8) : (x - 16) * (x + 16) = x^2 := by grind
-
-example [CommSemiring α] [AddRightCancel α] (x y : α) :
-    x^2*y = 1 → x*y^2 = y → y*x = 1 := by grind
-
-example (a b : UInt32) : a ≤ 2 → b ≤ 3 → a + b ≤ 5 := by grind
-
-example [LE α] [Std.IsLinearPreorder α] (a b c d : α) :
-    a ≤ b → ¬ (c ≤ b) → ¬ (d ≤ c) → a ≤ d := by grind
-
-/- Theory combination. -/
-
-example [CommRing α] [NoNatZeroDivisors α]
-    (a b c : α) (f : α → Nat) :
-    a + b + c = 3 → a^2 + b^2 + c^2 = 5 → a^3 + b^3 + c^3 = 7 →
-    f (a^4 + b^4) + f (9 - c^4) ≠ 1 := by grind
-
-/- Interactive mode. -/
-
--- Remark: Mathlib contains the definition of `Real`, `sin`, and `cos`.
-axiom Real : Type
-instance : Lean.Grind.CommRing Real := sorry
-
-axiom cos : Real → Real
-axiom sin : Real → Real
-axiom trig_identity : ∀ x, (cos x)^2 + (sin x)^2 = 1
-
--- Manually specify the patterns for `trig_identity`
-grind_pattern trig_identity => cos x
-grind_pattern trig_identity => sin x
-
-example : (cos x + sin x)^2 = 2 * cos x * sin x + 1 := by
-  grind? -- Provides code action
-
-example : (cos x + sin x)^2 = 2 * cos x * sin x + 1 := by
-  grind =>
-    instantiate only [trig_identity]
-    ring

doc/examples/bintree.lean.out.expected

@@ -1,2 +0,0 @@
-Tree.node (Tree.node (Tree.leaf) 1 "one" (Tree.leaf)) 2 "two" (Tree.node (Tree.leaf) 3 "three" (Tree.leaf))
-[(1, "one"), (2, "two"), (3, "three")]

doc/examples/compiler/run_test.sh

@@ -1,4 +0,0 @@
-leanmake --always-make bin
-
-capture ./build/bin/test hello world
-check_out_contains "[hello, world]"

doc/examples/compiler/test.lean.out.expected

@@ -1 +0,0 @@
-[hello, world]

doc/examples/interp.lean.out.expected

@@ -1,3 +0,0 @@
-30
-interp.lean:146:4: warning: declaration uses `sorry`
-3628800

doc/examples/palindromes.lean.out.expected

@@ -1,2 +0,0 @@
-true
-false

doc/examples/phoas.lean.out.expected

@@ -1,2 +0,0 @@
-"(((fun x_1 => (fun x_2 => (x_1 + x_2))) 1) 2)"
-"((((fun x_1 => (fun x_2 => (x_1 + x_2))) 1) 2) + 5)"

doc/examples/run_test.sh

@@ -1,4 +0,0 @@
-capture_only "$1" \
-  lean -Dlinter.all=false "$1"
-check_out_file
-check_exit_is_success

doc/examples/test_single.sh

@@ -0,0 +1,4 @@
+#!/usr/bin/env bash
+source ../../tests/common.sh
+
+exec_check_raw lean -Dlinter.all=false "$f"

doc/std/grove/lean-toolchain

@@ -1 +1 @@
-../../../build/release/stage1
+lean4

flake.lock

@@ -2,11 +2,11 @@
   "nodes": {
     "nixpkgs": {
       "locked": {
-        "lastModified": 1769018530,
-        "narHash": "sha256-S/5RU76BdQ32bbE99a+G9gMuatpVWEvIfeSjEqyoFS4=",
-        "rev": "88d3861acdd3d2f0e361767018218e51810df8a1",
+        "lastModified": 1745636243,
+        "narHash": "sha256-kbNvlQZf8wwok3d2X1kM/TlXH/MZ+03ZNv+IPPBx+DM=",
+        "rev": "f771eb401a46846c1aebd20552521b233dd7e18b",
         "type": "tarball",
-        "url": "https://releases.nixos.org/nixos/unstable/nixos-26.05pre931542.88d3861acdd3/nixexprs.tar.xz"
+        "url": "https://releases.nixos.org/nixos/unstable/nixos-25.05pre789333.f771eb401a46/nixexprs.tar.xz"
       },
       "original": {
         "type": "tarball",

flake.nix

@@ -18,7 +18,7 @@
       # An old nixpkgs for creating releases with an old glibc
       pkgsDist-old-aarch = import inputs.nixpkgs-old { localSystem.config = "aarch64-unknown-linux-gnu"; };
 
-      llvmPackages = pkgs.llvmPackages_19;
+      llvmPackages = pkgs.llvmPackages_15;
 
       devShellWithDist = pkgsDist: pkgs.mkShell.override {
           stdenv = pkgs.overrideCC pkgs.stdenv llvmPackages.clang;
@@ -67,5 +67,5 @@
         oldGlibc = devShellWithDist pkgsDist-old;
         oldGlibcAArch = devShellWithDist pkgsDist-old-aarch;
       };
-    }) ["x86_64-linux" "aarch64-linux" "aarch64-darwin"]);
+    }) ["x86_64-linux" "aarch64-linux"]);
 }

lean-toolchain

@@ -1 +1 @@
-build/release/stage1
+lean4

lean.code-workspace

@@ -0,0 +1,72 @@
+{
+	"folders": [
+		{
+			"path": "."
+		},
+		{
+			"path": "src"
+		},
+		{
+			"path": "tests"
+		},
+		{
+			"path": "script"
+		}
+	],
+	"settings": {
+		// Open terminal at root, not current workspace folder
+		// (there is not way to directly refer to the root folder included as `.` above)
+		"terminal.integrated.cwd": "${workspaceFolder:src}/..",
+		"files.insertFinalNewline": true,
+		"files.trimTrailingWhitespace": true,
+		"cmake.buildDirectory": "${workspaceFolder}/build/release",
+		"cmake.generator": "Unix Makefiles",
+		"[markdown]": {
+			"rewrap.wrappingColumn": 70
+		},
+		"[lean4]": {
+			"editor.rulers": [
+				100
+			]
+		}
+	},
+	"tasks": {
+		"version": "2.0.0",
+		"tasks": [
+			{
+				"label": "build",
+				"type": "shell",
+				"command": "make -C build/release -j$(nproc 2>/dev/null || sysctl -n hw.logicalcpu 2>/dev/null || echo 4)",
+				"problemMatcher": [],
+				"group": {
+					"kind": "build",
+					"isDefault": true
+				}
+			},
+			{
+				"label": "build-old",
+				"type": "shell",
+				"command": "make -C build/release -j$(nproc 2>/dev/null || sysctl -n hw.logicalcpu 2>/dev/null || echo 4) LAKE_EXTRA_ARGS=--old",
+				"problemMatcher": [],
+				"group": {
+					"kind": "build"
+				}
+			},
+			{
+				"label": "test",
+				"type": "shell",
+				"command": "NPROC=$(nproc 2>/dev/null || sysctl -n hw.logicalcpu 2>/dev/null || echo 4); CTEST_OUTPUT_ON_FAILURE=1 make -C build/release test -j$NPROC ARGS=\"-j$NPROC\"",
+				"problemMatcher": [],
+				"group": {
+					"kind": "test",
+					"isDefault": true
+				}
+			}
+		]
+	},
+	"extensions": {
+		"recommendations": [
+			"leanprover.lean4"
+		]
+	}
+}

releases_drafts/environment.md

@@ -0,0 +1,6 @@
+**Breaking Changes**
+
+* The functions `Lean.Environment.importModules` and `Lean.Environment.finalizeImport` have been extended with a new parameter `loadExts : Bool := false` that enables environment extension state loading.
+  Their previous behavior corresponds to setting the flag to `true` but is only safe to do in combination with `enableInitializersExecution`; see also the `importModules` docstring.
+  The new default value `false` ensures the functions can be used correctly multiple times within the same process when environment extension access is not needed.
+  The wrapper function `Lean.Environment.withImportModules` now always calls `importModules` with `loadExts := false` as it is incompatible with extension loading.

releases_drafts/module-system.md

@@ -0,0 +1,54 @@
+This release introduces the Lean module system, which allows files to
+control the visibility of their contents for other files. In previous
+releases, this feature was available as a preview when the option
+`experimental.module` was set to `true`; it is now a fully supported
+feature of Lean.
+
+# Benefits
+
+Because modules reduce the amount of information exposed to other
+code, they speed up rebuilds because irrelevant changes can be
+ignored, they make it possible to be deliberate about API evolution by
+hiding details that may change from clients, they help proofs be
+checked faster by avoiding accidentally unfolding definitions, and
+they lead to smaller executable files through improved dead code
+elimination.
+
+# Visibility
+
+A source file is a module if it begins with the `module` keyword.  By
+default, declarations in a module are private; the `public` modifier
+exports them. Proofs of theorems and bodies of definitions are private
+by default even when their signatures are public; the bodies of
+definitions can be made public by adding the `@[expose]`
+attribute. Theorems and opaque constants never expose their bodies.
+
+`public section` and `@[expose] section` change the default visibility
+of declarations in the section.
+
+# Imports
+
+Modules may only import other modules. By default, `import` adds the
+public information of the imported module to the private scope of the
+current module. Adding the `public` modifier to an import places the
+imported modules's public information in the public scope of the
+current module, exposing it in turn to the current module's clients.
+
+Within a package, `import all` can be used to import another module's
+private scope into the current module; this can be used to separate
+lemmas or tests from definition modules without exposing details to
+downstream clients.
+
+# Meta Code
+
+Code used in metaprograms must be marked `meta`. This ensures that the
+code is compiled and available for execution when it is needed during
+elaboration. Meta code may only reference other meta code. A whole
+module can be made available in the meta phase using `meta import`;
+this allows code to be shared across phases by importing the module in
+each phase. Code that is reachable from public metaprograms must be
+imported via `public meta import`, while local metaprograms can use
+plain `meta import` for their dependencies.
+
+
+The module system is described in detail in [the Lean language reference](https://lean-reference-manual-review.netlify.app/find/?domain=Verso.Genre.Manual.section&name=files).

script/PROFILER_README.md

@@ -1,178 +0,0 @@
-# Lean Profiler
-
-Profile Lean programs with demangled names using
-[samply](https://github.com/mstange/samply) and
-[Firefox Profiler](https://profiler.firefox.com).
-
-Python 3, no external dependencies.
-
-## Quick start
-
-```bash
-# One command: record, symbolicate, demangle, and open in Firefox Profiler
-script/lean_profile.sh ./my_lean_binary [args...]
-
-# See all options
-script/lean_profile.sh --help
-```
-
-Requirements: `samply` (`cargo install samply`), `python3`.
-
-## Reading demangled names
-
-The demangler transforms low-level C symbol names into readable Lean names
-and annotates them with compact modifiers.
-
-### Basic names
-
-| Raw symbol | Demangled |
-|---|---|
-| `l_Lean_Meta_Sym_main` | `Lean.Meta.Sym.main` |
-| `lp_std_List_map` | `List.map (std)` |
-| `_init_l_Foo_bar` | `[init] Foo.bar` |
-| `initialize_Init_Data` | `[module_init] Init.Data` |
-| `_lean_main` | `[lean] main` |
-
-### Modifier flags `[...]`
-
-Compiler-generated suffixes are folded into a bracket annotation after the
-name. These indicate *how* the function was derived from the original source
-definition.
-
-| Flag | Meaning | Compiler suffix |
-|---|---|---|
-| `arity`↓ | Reduced-arity specialization | `_redArg` |
-| `boxed` | Boxed calling-convention wrapper | `_boxed` |
-| `impl` | Implementation detail | `_impl` |
-| λ | Lambda-lifted closure | `_lam_N`, `_lambda_N`, `_elam_N` |
-| `jp` | Join point | `_jp_N` |
-| `closed` | Extracted closed subterm | `_closed_N` |
-| `private` | Private (module-scoped) definition | `_private.Module.0.` prefix |
-
-Examples:
-
-```
-Lean.Meta.Simp.simpLambda [boxed, λ]     -- boxed wrapper of a lambda-lifted closure
-Lean.Meta.foo [arity↓, private]           -- reduced-arity version of a private def
-```
-
-Multiple flags are comma-separated. Order reflects how they were collected
-(innermost suffix first).
-
-### Specializations `spec at ...`
-
-When the compiler specializes a function at a particular call site, the
-demangled name shows `spec at <context>` after the base name and its flags.
-The context names the function whose body triggered the specialization, and
-may carry its own modifier flags:
-
-```
-<base-name> [<base-flags>] spec at <context>[<context-flags>]
-```
-
-Examples:
-
-```
--- foo specialized at call site in bar
-Lean.Meta.foo spec at Lean.Meta.bar
-
--- foo (with a lambda closure) specialized at bar (with reduced arity and a lambda)
-Lean.Meta.foo [λ] spec at Lean.Meta.bar[λ, arity↓]
-
--- chained specialization: foo specialized at bar, then at baz
-Lean.Meta.foo spec at Lean.Meta.bar spec at Lean.Meta.baz[arity↓]
-```
-
-Context flags use the same symbols as base flags. When a context has no
-flags, the brackets are omitted.
-
-### Other annotations
-
-| Pattern | Meaning |
-|---|---|
-| `<apply/N>` | Lean runtime apply function (N arguments) |
-| `.cold.N` suffix | LLVM cold-path clone (infrequently executed) |
-| `(pkg)` suffix | Function from package `pkg` |
-
-## Tools
-
-### `script/lean_profile.sh` -- Full profiling pipeline
-
-Records a profile, symbolicates it via samply's API, demangles Lean names,
-and opens the result in Firefox Profiler. This is the recommended workflow.
-
-```bash
-script/lean_profile.sh ./build/release/stage1/bin/lean src/Lean/Elab/Term.lean
-```
-
-Environment variables:
-
-| Variable | Default | Description |
-|---|---|---|
-| `SAMPLY_RATE` | 1000 | Sampling rate in Hz |
-| `SAMPLY_PORT` | 3756 | Port for samply symbolication server |
-| `SERVE_PORT` | 3757 | Port for serving the demangled profile |
-| `PROFILE_KEEP` | 0 | Set to 1 to keep the temp directory |
-
-### `script/profiler/lean_demangle.py` -- Name demangler
-
-Demangles individual symbol names. Works as a stdin filter (like `c++filt`)
-or with arguments.
-
-```bash
-echo "l_Lean_Meta_Sym_main" | python3 script/profiler/lean_demangle.py
-# Lean.Meta.Sym.main
-
-python3 script/profiler/lean_demangle.py --raw l_foo___redArg
-# foo._redArg  (exact name, no postprocessing)
-```
-
-As a Python module:
-
-```python
-from lean_demangle import demangle_lean_name, demangle_lean_name_raw
-
-demangle_lean_name("l_foo___redArg")       # "foo [arity↓]"
-demangle_lean_name_raw("l_foo___redArg")   # "foo._redArg"
-```
-
-### `script/profiler/symbolicate_profile.py` -- Profile symbolicator
-
-Calls samply's symbolication API to resolve raw addresses into symbol names,
-then demangles them. Used internally by `lean_profile.sh`.
-
-### `script/profiler/serve_profile.py` -- Profile server
-
-Serves a profile JSON file to Firefox Profiler without re-symbolication
-(which would overwrite demangled names). Used internally by `lean_profile.sh`.
-
-### `script/profiler/lean_demangle_profile.py` -- Standalone profile rewriter
-
-Demangles names in an already-symbolicated profile file (if you have one
-from another source).
-
-```bash
-python3 script/profiler/lean_demangle_profile.py profile.json.gz -o demangled.json.gz
-```
-
-## Tests
-
-```bash
-cd script/profiler && python3 -m unittest test_demangle -v
-```
-
-## How it works
-
-The demangler is a faithful port of Lean 4's `Name.demangleAux` from
-`src/Lean/Compiler/NameMangling.lean`. It reverses the encoding used by
-`Name.mangle` / `Name.mangleAux` which turns hierarchical Lean names into
-valid C identifiers:
-
-- `_` separates name components (`Lean.Meta` -> `Lean_Meta`)
-- `__` encodes a literal underscore in a component name
-- `_xHH`, `_uHHHH`, `_UHHHHHHHH` encode special characters
-- `_N_` encodes numeric name components
-- `_00` is a disambiguation prefix for ambiguous patterns
-
-After demangling, a postprocessing pass folds compiler-generated suffixes
-into human-readable annotations (see [Reading demangled names](#reading-demangled-names)).

script/benchReelabRss.lean

@@ -83,7 +83,7 @@ def main (args : List String) : IO Unit := do
       lastRSS? := some rss
 
     let avgRSSDelta := totalRSSDelta / (n - 2)
-    IO.println s!"measurement: avg-reelab-rss-delta {avgRSSDelta*1024} b"
+    IO.println s!"avg-reelab-rss-delta: {avgRSSDelta}"
 
     let _ ← Ipc.collectDiagnostics requestNo uri versionNo
     (← Ipc.stdin).writeLspMessage (Message.notification "exit" none)

script/benchReelabWatchdogRss.lean

@@ -82,7 +82,7 @@ def main (args : List String) : IO Unit := do
       lastRSS? := some rss
 
     let avgRSSDelta := totalRSSDelta / (n - 2)
-    IO.println s!"measurement: avg-reelab-rss-delta {avgRSSDelta*1024} b"
+    IO.println s!"avg-reelab-rss-delta: {avgRSSDelta}"
 
     let _ ← Ipc.collectDiagnostics requestNo uri versionNo
     Ipc.shutdown requestNo

script/fmt

@@ -9,5 +9,5 @@ find -regex '.*/CMakeLists\.txt\(\.in\)?\|.*\.cmake\(\.in\)?' \
   ! -path "./stage0/*" \
   -exec \
     uvx gersemi --in-place --line-length 120 --indent 2 \
-    --definitions src/cmake/Modules/ src/CMakeLists.txt tests/CMakeLists.txt \
+    --definitions src/cmake/Modules/ src/CMakeLists.txt \
     -- {} +

script/gen_constants_cpp.py

@@ -1,4 +1,4 @@
-#!/usr/bin/env python3
+#!/usr/bin/env python
 # -*- coding: utf-8 -*-
 #
 # Copyright (c) 2015 Microsoft Corporation. All rights reserved.

script/gen_tokens_cpp.py

@@ -1,4 +1,4 @@
-#!/usr/bin/env python3
+#!/usr/bin/env python
 # -*- coding: utf-8 -*-
 #
 # Copyright (c) 2015 Microsoft Corporation. All rights reserved.

script/lean-bisect

@@ -36,7 +36,7 @@ sys.path.insert(0, str(Path(__file__).parent))
 import build_artifact
 
 # Constants
-NIGHTLY_PATTERN = re.compile(r'^nightly-(\d{4})-(\d{2})-(\d{2})(-rev(\d+))?$')
+NIGHTLY_PATTERN = re.compile(r'^nightly-(\d{4})-(\d{2})-(\d{2})$')
 VERSION_PATTERN = re.compile(r'^v4\.(\d+)\.(\d+)(-rc\d+)?$')
 # Accept short SHAs (7+ chars) - we'll resolve to full SHA later
 SHA_PATTERN = re.compile(r'^[0-9a-f]{7,40}$')
@@ -158,7 +158,7 @@ def parse_identifier(s: str) -> Tuple[str, str]:
         return ('sha', full_sha)
     error(f"Invalid identifier format: '{s}'\n"
           f"Expected one of:\n"
-          f"  - nightly-YYYY-MM-DD or nightly-YYYY-MM-DD-revK (e.g., nightly-2024-06-15, nightly-2024-06-15-rev1)\n"
+          f"  - nightly-YYYY-MM-DD (e.g., nightly-2024-06-15)\n"
           f"  - v4.X.Y or v4.X.Y-rcK (e.g., v4.8.0, v4.9.0-rc1)\n"
           f"  - commit SHA (short or full)")
 
@@ -244,13 +244,8 @@ def fetch_nightly_tags() -> List[str]:
         if len(data) < 100:
             break
 
-    # Sort by date and revision (nightly-YYYY-MM-DD-revK needs numeric comparison on rev)
-    def nightly_sort_key(tag):
-        m = NIGHTLY_PATTERN.match(tag)
-        if m:
-            return (int(m.group(1)), int(m.group(2)), int(m.group(3)), int(m.group(5) or 0))
-        return (0, 0, 0, 0)
-    tags.sort(key=nightly_sort_key)
+    # Sort by date (nightly-YYYY-MM-DD format sorts lexicographically)
+    tags.sort()
     return tags
 
 def get_commit_for_nightly(nightly: str) -> str:
@@ -1029,7 +1024,6 @@ Range Syntax:
 Identifier Formats:
 
   nightly-YYYY-MM-DD    Nightly build date (e.g., nightly-2024-06-15)
-  nightly-YYYY-MM-DD-revK  Revised nightly (e.g., nightly-2024-06-15-rev1)
                         Uses pre-built toolchains from leanprover/lean4-nightly.
                         Fast: downloads via elan (~30s each).
 
@@ -1157,9 +1151,9 @@ Examples:
     # Validate --nightly-only
     if args.nightly_only:
         if from_val is not None and from_type != 'nightly':
-            error("--nightly-only requires FROM to be a nightly identifier (nightly-YYYY-MM-DD or nightly-YYYY-MM-DD-revK)")
+            error("--nightly-only requires FROM to be a nightly identifier (nightly-YYYY-MM-DD)")
         if to_type != 'nightly':
-            error("--nightly-only requires TO to be a nightly identifier (nightly-YYYY-MM-DD or nightly-YYYY-MM-DD-revK)")
+            error("--nightly-only requires TO to be a nightly identifier (nightly-YYYY-MM-DD)")
 
     if from_val:
         info(f"From: {from_val} ({from_type})")

script/lean-toolchain

@@ -1 +1 @@
-../build/release/stage1
+lean4

script/lean_profile.sh

@@ -1,133 +0,0 @@
-#!/usr/bin/env bash
-# Profile a Lean binary with demangled names.
-#
-# Usage:
-#   script/lean_profile.sh ./my_lean_binary [args...]
-#
-# Records a profile with samply, symbolicates via samply's API,
-# demangles Lean symbol names, and opens the result in Firefox Profiler.
-#
-# Requirements: samply (cargo install samply), python3
-#
-# Options (via environment variables):
-#   SAMPLY_RATE    — sampling rate in Hz (default: 1000)
-#   SAMPLY_PORT    — port for samply symbolication server (default: 3756)
-#   SERVE_PORT     — port for serving the demangled profile (default: 3757)
-#   PROFILE_KEEP   — set to 1 to keep the raw profile after demangling
-
-set -euo pipefail
-
-SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd)"
-PROFILER_DIR="$SCRIPT_DIR/profiler"
-SYMBOLICATE="$PROFILER_DIR/symbolicate_profile.py"
-SERVE_PROFILE="$PROFILER_DIR/serve_profile.py"
-
-usage() {
-    cat >&2 <<EOF
-Usage: $0 [options] <lean-binary> [args...]
-
-Profile a Lean binary and view the results in Firefox Profiler
-with demangled Lean names.
-
-Requirements:
-  samply    cargo install samply
-  python3   (included with macOS / most Linux distros)
-
-Environment variables:
-  SAMPLY_RATE    sampling rate in Hz (default: 1000)
-  SAMPLY_PORT    port for samply symbolication server (default: 3756)
-  SERVE_PORT     port for serving the demangled profile (default: 3757)
-  PROFILE_KEEP   set to 1 to keep the temp directory after profiling
-
-Reading demangled names:
-  Compiler suffixes are shown as modifier flags after the name:
-    [arity↓]   reduced-arity specialization     (_redArg)
-    [boxed]    boxed calling-convention wrapper  (_boxed)
-    [λ]        lambda-lifted closure             (_lam_N, _lambda_N, _elam_N)
-    [jp]       join point                        (_jp_N)
-    [closed]   extracted closed subterm          (_closed_N)
-    [private]  private (module-scoped) def       (_private.Module.0. prefix)
-    [impl]     implementation detail             (_impl)
-
-  Specializations appear after the flags:
-    Lean.Meta.foo [λ] spec at Lean.Meta.bar[λ, arity↓]
-      = foo (with lambda closure), specialized at bar (lambda, reduced arity)
-
-  Multiple "spec at" entries indicate chained specializations.
-  See script/PROFILER_README.md for full documentation.
-EOF
-    exit "${1:-0}"
-}
-
-if [ $# -eq 0 ]; then
-    usage 1
-fi
-
-case "${1:-}" in
-    -h|--help) usage 0 ;;
-esac
-
-if ! command -v samply &>/dev/null; then
-    echo "error: samply not found. Install with: cargo install samply" >&2
-    exit 1
-fi
-
-RATE="${SAMPLY_RATE:-1000}"
-PORT="${SAMPLY_PORT:-3756}"
-SERVE="${SERVE_PORT:-3757}"
-TMPDIR=$(mktemp -d /tmp/lean-profile-XXXXXX)
-TMPFILE="$TMPDIR/profile.json.gz"
-DEMANGLED="$TMPDIR/profile-demangled.json.gz"
-SAMPLY_LOG="$TMPDIR/samply.log"
-SAMPLY_PID=""
-
-cleanup() {
-    if [ -n "$SAMPLY_PID" ]; then
-        kill "$SAMPLY_PID" 2>/dev/null || true
-        wait "$SAMPLY_PID" 2>/dev/null || true
-    fi
-    # Safety net: kill anything still on the symbolication port
-    lsof -ti :"$PORT" 2>/dev/null | xargs kill 2>/dev/null || true
-    [ "${PROFILE_KEEP:-0}" = "1" ] || rm -rf "$TMPDIR"
-}
-trap cleanup EXIT
-
-# Step 1: Record
-echo "Recording profile (rate=${RATE} Hz)..." >&2
-samply record --save-only -o "$TMPFILE" -r "$RATE" "$@"
-
-# Step 2: Start samply server for symbolication
-echo "Starting symbolication server..." >&2
-samply load --no-open -P "$PORT" "$TMPFILE" > "$SAMPLY_LOG" 2>&1 &
-SAMPLY_PID=$!
-
-# Wait for server to be ready
-for i in $(seq 1 30); do
-    if grep -q "Local server listening" "$SAMPLY_LOG" 2>/dev/null; then
-        break
-    fi
-    sleep 0.2
-done
-
-# Extract the token from samply's output
-TOKEN=$(grep -oE '[a-z0-9]{30,}' "$SAMPLY_LOG" | head -1)
-
-if [ -z "$TOKEN" ]; then
-    echo "error: could not get samply server token" >&2
-    exit 1
-fi
-
-SERVER_URL="http://127.0.0.1:${PORT}/${TOKEN}"
-
-# Step 3: Symbolicate + demangle
-echo "Symbolicating and demangling..." >&2
-python3 "$SYMBOLICATE" --server "$SERVER_URL" "$TMPFILE" -o "$DEMANGLED"
-
-# Step 4: Kill symbolication server
-kill "$SAMPLY_PID" 2>/dev/null || true
-wait "$SAMPLY_PID" 2>/dev/null || true
-SAMPLY_PID=""
-
-# Step 5: Serve the demangled profile directly (without samply's re-symbolication)
-echo "Opening in Firefox Profiler..." >&2
-python3 "$SERVE_PROFILE" "$DEMANGLED" -P "$SERVE"

script/lib/update-stage0

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 set -euo pipefail
 
-rm -rf stage0 || true
+rm -r stage0 || true
 # don't copy untracked files
 # `:!` is git glob flavor for exclude patterns
 for f in $(git ls-files src ':!:src/lake/*' ':!:src/Leanc.lean'); do

script/profiler/lean_demangle.py

@@ -1,82 +0,0 @@
-#!/usr/bin/env python3
-"""
-Lean name demangler — thin wrapper around the Lean CLI tool.
-
-Spawns ``lean --run lean_demangle_cli.lean`` as a persistent subprocess
-and communicates via stdin/stdout pipes. This ensures a single source
-of truth for demangling logic (the Lean implementation in
-``Lean.Compiler.NameDemangling``).
-
-Usage as a filter (like c++filt):
-    echo "l_Lean_Meta_Sym_main" | python lean_demangle.py
-
-Usage as a module:
-    from lean_demangle import demangle_lean_name
-    print(demangle_lean_name("l_Lean_Meta_Sym_main"))
-"""
-
-import atexit
-import os
-import subprocess
-import sys
-
-_process = None
-_script_dir = os.path.dirname(os.path.abspath(__file__))
-_cli_script = os.path.join(_script_dir, "lean_demangle_cli.lean")
-
-
-def _get_process():
-    """Get or create the persistent Lean demangler subprocess."""
-    global _process
-    if _process is not None and _process.poll() is None:
-        return _process
-
-    lean = os.environ.get("LEAN", "lean")
-    _process = subprocess.Popen(
-        [lean, "--run", _cli_script],
-        stdin=subprocess.PIPE,
-        stdout=subprocess.PIPE,
-        stderr=subprocess.DEVNULL,
-        text=True,
-        bufsize=1,  # line buffered
-    )
-    atexit.register(_cleanup)
-    return _process
-
-
-def _cleanup():
-    global _process
-    if _process is not None:
-        try:
-            _process.stdin.close()
-            _process.wait(timeout=5)
-        except Exception:
-            _process.kill()
-        _process = None
-
-
-def demangle_lean_name(mangled):
-    """
-    Demangle a C symbol name produced by the Lean 4 compiler.
-
-    Returns a human-friendly demangled name, or the original string
-    if it is not a Lean symbol.
-    """
-    try:
-        proc = _get_process()
-        proc.stdin.write(mangled + "\n")
-        proc.stdin.flush()
-        result = proc.stdout.readline().rstrip("\n")
-        return result if result else mangled
-    except Exception:
-        return mangled
-
-
-def main():
-    """Filter stdin, demangling Lean names."""
-    for line in sys.stdin:
-        print(demangle_lean_name(line.rstrip("\n")))
-
-
-if __name__ == "__main__":
-    main()

script/profiler/lean_demangle_cli.lean

@@ -1,32 +0,0 @@
-/-
-Copyright (c) 2026 Lean FRO, LLC. All rights reserved.
-Released under Apache 2.0 license as described in the file LICENSE.
-Authors: Kim Morrison
--/
-module
-
-import Lean.Compiler.NameDemangling
-
-/-!
-Lean name demangler CLI tool. Reads mangled symbol names from stdin (one per
-line) and writes demangled names to stdout. Non-Lean symbols pass through
-unchanged. Like `c++filt` but for Lean names.
-
-Usage:
-    echo "l_Lean_Meta_foo" | lean --run lean_demangle_cli.lean
-    cat symbols.txt | lean --run lean_demangle_cli.lean
--/
-
-open Lean.Name.Demangle
-
-def main : IO Unit := do
-  let stdin ← IO.getStdin
-  let stdout ← IO.getStdout
-  repeat do
-    let line ← stdin.getLine
-    if line.isEmpty then break
-    let sym := line.trimRight
-    match demangleSymbol sym with
-    | some s => stdout.putStrLn s
-    | none => stdout.putStrLn sym
-    stdout.flush

script/profiler/lean_demangle_profile.py

@@ -1,117 +0,0 @@
-#!/usr/bin/env python3
-"""
-Lean name demangler for samply / Firefox Profiler profiles.
-
-Reads a profile JSON (plain or gzipped), demangles Lean function names
-in the string table, and writes the result back.
-
-Usage:
-    python lean_demangle_profile.py profile.json -o profile-demangled.json
-    python lean_demangle_profile.py profile.json.gz -o profile-demangled.json.gz
-"""
-
-import argparse
-import gzip
-import json
-import sys
-
-from lean_demangle import demangle_lean_name
-
-
-def _demangle_string_array(string_array):
-    """Demangle Lean names in a string array in-place. Returns count."""
-    count = 0
-    for i, s in enumerate(string_array):
-        if not isinstance(s, str):
-            continue
-        demangled = demangle_lean_name(s)
-        if demangled != s:
-            string_array[i] = demangled
-            count += 1
-    return count
-
-
-def rewrite_profile(profile):
-    """
-    Demangle Lean names in a Firefox Profiler profile dict (in-place).
-
-    Handles two profile formats:
-    - Newer: shared.stringArray (single shared string table)
-    - Older/samply: per-thread stringArray (each thread has its own)
-    """
-    count = 0
-
-    # Shared string table (newer Firefox Profiler format)
-    shared = profile.get("shared")
-    if shared is not None:
-        sa = shared.get("stringArray")
-        if sa is not None:
-            count += _demangle_string_array(sa)
-
-    # Per-thread string tables (samply format)
-    for thread in profile.get("threads", []):
-        sa = thread.get("stringArray")
-        if sa is not None:
-            count += _demangle_string_array(sa)
-
-    return count
-
-
-def process_profile_file(input_path, output_path):
-    """Read a profile, demangle names, write it back."""
-    is_gzip = input_path.endswith('.gz')
-
-    if is_gzip:
-        with gzip.open(input_path, 'rt', encoding='utf-8') as f:
-            profile = json.load(f)
-    else:
-        with open(input_path, 'r', encoding='utf-8') as f:
-            profile = json.load(f)
-
-    count = rewrite_profile(profile)
-
-    out_gzip = output_path.endswith('.gz') if output_path else is_gzip
-
-    if output_path:
-        if out_gzip:
-            with gzip.open(output_path, 'wt', encoding='utf-8') as f:
-                json.dump(profile, f, ensure_ascii=False)
-        else:
-            with open(output_path, 'w', encoding='utf-8') as f:
-                json.dump(profile, f, ensure_ascii=False)
-    else:
-        json.dump(profile, sys.stdout, ensure_ascii=False)
-        sys.stdout.write('\n')
-
-    return count
-
-
-def main():
-    parser = argparse.ArgumentParser(
-        description="Demangle Lean names in samply/Firefox Profiler profiles")
-    parser.add_argument('input', help='Input profile (JSON or .json.gz)')
-    parser.add_argument('-o', '--output',
-                        help='Output path (default: stdout for JSON, '
-                             'or input with -demangled suffix)')
-    args = parser.parse_args()
-
-    output = args.output
-    if output is None and not sys.stdout.isatty():
-        output = None  # write to stdout
-    elif output is None:
-        # Generate output filename
-        inp = args.input
-        if inp.endswith('.json.gz'):
-            output = inp[:-8] + '-demangled.json.gz'
-        elif inp.endswith('.json'):
-            output = inp[:-5] + '-demangled.json'
-        else:
-            output = inp + '-demangled'
-
-    count = process_profile_file(args.input, output)
-    if output:
-        print(f"Demangled {count} names, wrote {output}", file=sys.stderr)
-
-
-if __name__ == '__main__':
-    main()

script/profiler/serve_profile.py

@@ -1,94 +0,0 @@
-#!/usr/bin/env python3
-"""
-Serve a Firefox Profiler JSON file and open it in the browser.
-
-Unlike `samply load`, this does NOT provide a symbolication API,
-so Firefox Profiler will use the names already in the profile as-is.
-"""
-
-import argparse
-import gzip
-import http.server
-import io
-import sys
-import threading
-import webbrowser
-import urllib.parse
-
-
-class ProfileHandler(http.server.BaseHTTPRequestHandler):
-    """Serve the profile JSON and handle CORS for Firefox Profiler."""
-
-    profile_data = None  # set by main()
-
-    def do_GET(self):
-        if self.path == "/profile.json":
-            self.send_response(200)
-            self.send_header("Content-Type", "application/json")
-            self.send_header("Content-Encoding", "gzip")
-            self.send_header("Access-Control-Allow-Origin", "*")
-            self.end_headers()
-            self.wfile.write(self.profile_data)
-        else:
-            self.send_response(404)
-            self.end_headers()
-
-    def do_OPTIONS(self):
-        # CORS preflight
-        self.send_response(200)
-        self.send_header("Access-Control-Allow-Origin", "*")
-        self.send_header("Access-Control-Allow-Methods", "GET")
-        self.send_header("Access-Control-Allow-Headers", "Content-Type")
-        self.end_headers()
-
-    def log_message(self, format, *args):
-        pass  # suppress request logs
-
-
-def main():
-    parser = argparse.ArgumentParser(
-        description="Serve a profile JSON for Firefox Profiler")
-    parser.add_argument("profile", help="Profile file (.json or .json.gz)")
-    parser.add_argument("-P", "--port", type=int, default=3457,
-                        help="Port to serve on (default: 3457)")
-    parser.add_argument("-n", "--no-open", action="store_true",
-                        help="Do not open the browser")
-    args = parser.parse_args()
-
-    # Read the profile data (keep it gzipped for efficient serving)
-    if args.profile.endswith(".gz"):
-        with open(args.profile, "rb") as f:
-            ProfileHandler.profile_data = f.read()
-    else:
-        with open(args.profile, "rb") as f:
-            raw = f.read()
-        buf = io.BytesIO()
-        with gzip.GzipFile(fileobj=buf, mode="wb") as gz:
-            gz.write(raw)
-        ProfileHandler.profile_data = buf.getvalue()
-
-    http.server.HTTPServer.allow_reuse_address = True
-    server = http.server.HTTPServer(("127.0.0.1", args.port), ProfileHandler)
-    profile_url = f"http://127.0.0.1:{args.port}/profile.json"
-    encoded = urllib.parse.quote(profile_url, safe="")
-    viewer_url = f"https://profiler.firefox.com/from-url/{encoded}"
-
-    if not args.no_open:
-        # Open browser after a short delay to let server start
-        def open_browser():
-            webbrowser.open(viewer_url)
-        threading.Timer(0.5, open_browser).start()
-
-    print(f"Serving profile at {profile_url}", file=sys.stderr)
-    print(f"Firefox Profiler: {viewer_url}", file=sys.stderr)
-    print("Press Ctrl+C to stop.", file=sys.stderr)
-
-    try:
-        server.serve_forever()
-    except KeyboardInterrupt:
-        print("\nStopped.", file=sys.stderr)
-        server.server_close()
-
-
-if __name__ == "__main__":
-    main()

script/profiler/symbolicate_profile.py

@@ -1,198 +0,0 @@
-#!/usr/bin/env python3
-"""
-Symbolicate a raw samply profile using samply's symbolication API,
-then demangle Lean names.
-
-Usage:
-    python symbolicate_profile.py --server http://127.0.0.1:3000/TOKEN \
-        raw-profile.json.gz -o symbolicated-demangled.json.gz
-"""
-
-import argparse
-import gzip
-import json
-import sys
-import urllib.request
-
-from lean_demangle import demangle_lean_name
-
-
-def symbolicate_and_demangle(profile, server_url):
-    """
-    Symbolicate a raw samply profile via the symbolication API,
-    then demangle Lean names. Modifies the profile in-place.
-    Returns the number of names resolved.
-    """
-    libs = profile.get("libs", [])
-    memory_map = [[lib["debugName"], lib["breakpadId"]] for lib in libs]
-
-    count = 0
-    for thread in profile.get("threads", []):
-        count += _process_thread(thread, libs, memory_map, server_url)
-
-    return count
-
-
-def _process_thread(thread, libs, memory_map, server_url):
-    """Symbolicate and demangle one thread. Returns count of resolved names."""
-    sa = thread.get("stringArray")
-    ft = thread.get("frameTable")
-    func_t = thread.get("funcTable")
-    rt = thread.get("resourceTable")
-
-    if not all([sa, ft, func_t, rt]):
-        return 0
-
-    # Build mapping: func_index -> (lib_index, address)
-    # A function may be referenced by multiple frames; pick any address.
-    func_info = {}  # func_idx -> (lib_idx, address)
-    for i in range(ft.get("length", 0)):
-        addr = ft["address"][i]
-        func_idx = ft["func"][i]
-        if func_idx in func_info:
-            continue
-        res_idx = func_t["resource"][func_idx]
-        if res_idx < 0 or res_idx >= rt.get("length", 0):
-            continue
-        lib_idx = rt["lib"][res_idx]
-        if lib_idx < 0 or lib_idx >= len(libs):
-            continue
-        func_info[func_idx] = (lib_idx, addr)
-
-    if not func_info:
-        return 0
-
-    # Batch symbolication: group by lib, send all addresses at once
-    frames_to_symbolicate = []
-    func_order = []  # track which func each frame corresponds to
-    for func_idx, (lib_idx, addr) in func_info.items():
-        frames_to_symbolicate.append([lib_idx, addr])
-        func_order.append(func_idx)
-
-    # Call the symbolication API
-    symbols = _call_symbolication_api(
-        server_url, memory_map, frames_to_symbolicate)
-
-    if not symbols:
-        return 0
-
-    # Update stringArray with demangled names
-    count = 0
-    for func_idx, symbol_name in zip(func_order, symbols):
-        if symbol_name is None:
-            continue
-        demangled = demangle_lean_name(symbol_name)
-        name_idx = func_t["name"][func_idx]
-        if name_idx < len(sa):
-            sa[name_idx] = demangled
-            count += 1
-
-    return count
-
-
-def _call_symbolication_api(server_url, memory_map, frames):
-    """
-    Call the Firefox Profiler symbolication API v5.
-    frames: list of [lib_index, address]
-    Returns: list of symbol names (or None for unresolved frames).
-    """
-    url = server_url.rstrip("/") + "/symbolicate/v5"
-
-    # Send all frames as one "stack" in one job
-    req_body = json.dumps({
-        "memoryMap": memory_map,
-        "stacks": [frames],
-    }).encode()
-
-    req = urllib.request.Request(
-        url,
-        data=req_body,
-        headers={"Content-Type": "application/json"},
-    )
-
-    try:
-        with urllib.request.urlopen(req, timeout=60) as resp:
-            result = json.loads(resp.read())
-    except Exception as e:
-        print(f"Symbolication API error: {e}", file=sys.stderr)
-        return None
-
-    if "error" in result:
-        print(f"Symbolication API error: {result['error']}", file=sys.stderr)
-        return None
-
-    # Extract symbol names from result
-    results = result.get("results", [])
-    if not results:
-        return None
-
-    stacks = results[0].get("stacks", [[]])
-    if not stacks:
-        return None
-
-    symbols = []
-    for frame_result in stacks[0]:
-        if isinstance(frame_result, dict):
-            symbols.append(frame_result.get("function"))
-        elif isinstance(frame_result, str):
-            symbols.append(frame_result)
-        else:
-            symbols.append(None)
-
-    return symbols
-
-
-def process_file(input_path, output_path, server_url):
-    """Read a raw profile, symbolicate + demangle, write it back."""
-    is_gzip = input_path.endswith('.gz')
-
-    if is_gzip:
-        with gzip.open(input_path, 'rt', encoding='utf-8') as f:
-            profile = json.load(f)
-    else:
-        with open(input_path, 'r', encoding='utf-8') as f:
-            profile = json.load(f)
-
-    count = symbolicate_and_demangle(profile, server_url)
-
-    out_gzip = output_path.endswith('.gz') if output_path else is_gzip
-    if output_path:
-        if out_gzip:
-            with gzip.open(output_path, 'wt', encoding='utf-8') as f:
-                json.dump(profile, f, ensure_ascii=False)
-        else:
-            with open(output_path, 'w', encoding='utf-8') as f:
-                json.dump(profile, f, ensure_ascii=False)
-    else:
-        json.dump(profile, sys.stdout, ensure_ascii=False)
-        sys.stdout.write('\n')
-
-    return count
-
-
-def main():
-    parser = argparse.ArgumentParser(
-        description="Symbolicate a raw samply profile and demangle Lean names")
-    parser.add_argument('input', help='Raw profile (JSON or .json.gz)')
-    parser.add_argument('-o', '--output', help='Output path')
-    parser.add_argument('--server', required=True,
-                        help='Samply server URL (e.g., http://127.0.0.1:3000/TOKEN)')
-    args = parser.parse_args()
-
-    output = args.output
-    if output is None:
-        inp = args.input
-        if inp.endswith('.json.gz'):
-            output = inp[:-8] + '-demangled.json.gz'
-        elif inp.endswith('.json'):
-            output = inp[:-5] + '-demangled.json'
-        else:
-            output = inp + '-demangled'
-
-    count = process_file(args.input, output, args.server)
-    print(f"Symbolicated and demangled {count} names, wrote {output}",
-          file=sys.stderr)
-
-
-if __name__ == '__main__':
-    main()

script/release_checklist.py

@@ -11,7 +11,7 @@ IMPORTANT: Keep this documentation up-to-date when modifying the script's behavi
 What this script does:
 1. Validates preliminary Lean4 release infrastructure:
    - Checks that the release branch (releases/vX.Y.0) exists
-   - Verifies CMake version settings are correct (both src/ and stage0/)
+   - Verifies CMake version settings are correct
    - Confirms the release tag exists
    - Validates the release page exists on GitHub (created automatically by CI after tag push)
    - Checks the release notes page on lean-lang.org (updated while bumping the `reference-manual` repository)
@@ -326,42 +326,6 @@ def check_cmake_version(repo_url, branch, version_major, version_minor, github_t
     print(f"  ✅ CMake version settings are correct in {cmake_file_path}")
     return True
 
-def check_stage0_version(repo_url, branch, version_major, version_minor, github_token):
-    """Verify that stage0/src/CMakeLists.txt has the same version as src/CMakeLists.txt.
-
-    The stage0 pre-built binaries stamp .olean headers with their baked-in version.
-    If stage0 has a different version (e.g. from a 'begin development cycle' bump),
-    the release tarball will contain .olean files with the wrong version.
-    """
-    stage0_cmake = "stage0/src/CMakeLists.txt"
-    content = get_branch_content(repo_url, branch, stage0_cmake, github_token)
-    if content is None:
-        print(f"  ❌ Could not retrieve {stage0_cmake} from {branch}")
-        return False
-
-    errors = []
-    for line in content.splitlines():
-        stripped = line.strip()
-        if stripped.startswith("set(LEAN_VERSION_MAJOR "):
-            actual = stripped.split()[-1].rstrip(")")
-            if actual != str(version_major):
-                errors.append(f"LEAN_VERSION_MAJOR: expected {version_major}, found {actual}")
-        elif stripped.startswith("set(LEAN_VERSION_MINOR "):
-            actual = stripped.split()[-1].rstrip(")")
-            if actual != str(version_minor):
-                errors.append(f"LEAN_VERSION_MINOR: expected {version_minor}, found {actual}")
-
-    if errors:
-        print(f"  ❌ stage0 version mismatch in {stage0_cmake}:")
-        for error in errors:
-            print(f"     {error}")
-        print(f"     The stage0 compiler stamps .olean headers with its baked-in version.")
-        print(f"     Run `make update-stage0` to rebuild stage0 with the correct version.")
-        return False
-
-    print(f"  ✅ stage0 version matches in {stage0_cmake}")
-    return True
-
 def extract_org_repo_from_url(repo_url):
     """Extract the 'org/repo' part from a GitHub URL."""
     if repo_url.startswith("https://github.com/"):
@@ -477,10 +441,7 @@ def get_pr_ci_status(repo_url, pr_number, github_token):
     conclusions = [run['conclusion'] for run in check_runs if run.get('status') == 'completed']
     in_progress = [run for run in check_runs if run.get('status') in ['queued', 'in_progress']]
 
-    failed = sum(1 for c in conclusions if c in ['failure', 'timed_out', 'action_required'])
     if in_progress:
-        if failed > 0:
-            return "failure", f"{failed} check(s) failing, {len(in_progress)} still in progress"
         return "pending", f"{len(in_progress)} check(s) in progress"
 
     if not conclusions:
@@ -489,6 +450,7 @@ def get_pr_ci_status(repo_url, pr_number, github_token):
     if all(c == 'success' for c in conclusions):
         return "success", f"All {len(conclusions)} checks passed"
 
+    failed = sum(1 for c in conclusions if c in ['failure', 'timed_out', 'action_required'])
     if failed > 0:
         return "failure", f"{failed} check(s) failed"
 
@@ -718,9 +680,6 @@ def main():
         # Check CMake version settings
         if not check_cmake_version(lean_repo_url, branch_name, version_major, version_minor, github_token):
             lean4_success = False
-        # Check that stage0 version matches (stage0 stamps .olean headers with its version)
-        if not check_stage0_version(lean_repo_url, branch_name, version_major, version_minor, github_token):
-            lean4_success = False
 
     # Check for tag and release page
     if not tag_exists(lean_repo_url, toolchain, github_token):
@@ -877,14 +836,6 @@ def main():
             continue
         print(f"  ✅ On compatible toolchain (>= {toolchain})")
 
-        # For reference-manual, check that the release notes title is correct BEFORE tagging.
-        # This catches the case where the toolchain bump PR was merged without updating
-        # the release notes title (e.g., still showing "-rc1" for a stable release).
-        if name == "reference-manual":
-            if not check_reference_manual_release_title(url, toolchain, branch, github_token):
-                repo_status[name] = False
-                continue
-
         # Special handling for ProofWidgets4
         if name == "ProofWidgets4":
             if not check_proofwidgets4_release(url, toolchain, github_token):
@@ -965,8 +916,8 @@ def main():
             
             print(f"  ✅ Bump branch {bump_branch} exists")
             
-            # Update the lean-toolchain to the latest nightly for newly created bump branches
-            if branch_created:
+            # For batteries and mathlib4, update the lean-toolchain to the latest nightly
+            if branch_created and name in ["batteries", "mathlib4"]:
                 latest_nightly = get_latest_nightly_tag(github_token)
                 if latest_nightly:
                     nightly_toolchain = f"leanprover/lean4:{latest_nightly}"
@@ -1006,15 +957,14 @@ def main():
         # Find the actual minor version in CMakeLists.txt
         for line in cmake_lines:
             if line.strip().startswith("set(LEAN_VERSION_MINOR "):
-                m = re.search(r'set\(LEAN_VERSION_MINOR\s+(\d+)', line)
-                actual_minor = int(m.group(1)) if m else 0
+                actual_minor = int(line.split()[-1].rstrip(")"))
                 version_minor_correct = actual_minor >= next_minor
                 break
         else:
             version_minor_correct = False
             
         is_release_correct = any(
-            re.match(r'set\(LEAN_VERSION_IS_RELEASE\s+0[\s)]', l.strip())
+            l.strip().startswith("set(LEAN_VERSION_IS_RELEASE 0)") 
             for l in cmake_lines
         )
         

script/release_repos.yml

@@ -65,6 +65,13 @@ repositories:
     branch: master
     dependencies: [lean4-unicode-basic]
 
+  - name: doc-gen4
+    url: https://github.com/leanprover/doc-gen4
+    toolchain-tag: true
+    stable-branch: false
+    branch: main
+    dependencies: [lean4-cli, BibtexQuery]
+
   - name: reference-manual
     url: https://github.com/leanprover/reference-manual
     toolchain-tag: true
@@ -77,7 +84,8 @@ repositories:
     toolchain-tag: false
     stable-branch: false
     branch: main
-    dependencies: []
+    dependencies:
+      - batteries
 
   - name: aesop
     url: https://github.com/leanprover-community/aesop
@@ -99,16 +107,10 @@ repositories:
       - lean4checker
       - batteries
       - lean4-cli
+      - doc-gen4
       - import-graph
       - plausible
 
-  - name: doc-gen4
-    url: https://github.com/leanprover/doc-gen4
-    toolchain-tag: true
-    stable-branch: false
-    branch: main
-    dependencies: [lean4-cli, BibtexQuery, mathlib4]
-
   - name: cslib
     url: https://github.com/leanprover/cslib
     toolchain-tag: true

script/release_steps.py

@@ -24,7 +24,6 @@ What this script does:
    - Safety checks for repositories using bump branches
    - Custom build and test procedures
    - lean-fro.org: runs scripts/update.sh to regenerate site content
-   - mathlib4: updates ProofWidgets4 pin (v0.0.X sequential tags, not v4.X.Y)
 
 6. Commits the changes with message "chore: bump toolchain to {version}"
 
@@ -60,8 +59,6 @@ import re
 import subprocess
 import shutil
 import json
-import requests
-import base64
 from pathlib import Path
 
 # Color functions for terminal output
@@ -118,60 +115,6 @@ def find_repo(repo_name, config):
         sys.exit(1)
     return matching_repos[0]
 
-def get_github_token():
-    try:
-        result = subprocess.run(['gh', 'auth', 'token'], capture_output=True, text=True)
-        if result.returncode == 0:
-            return result.stdout.strip()
-    except FileNotFoundError:
-        pass
-    return None
-
-def find_proofwidgets_tag(version):
-    """Find the latest ProofWidgets4 tag that uses the given toolchain version.
-
-    ProofWidgets4 uses sequential version tags (v0.0.X) rather than toolchain-based tags.
-    This function finds the most recent tag whose lean-toolchain matches the target version
-    exactly, checking the 20 most recent tags.
-    """
-    github_token = get_github_token()
-    api_base = "https://api.github.com/repos/leanprover-community/ProofWidgets4"
-    headers = {'Authorization': f'token {github_token}'} if github_token else {}
-
-    response = requests.get(f"{api_base}/git/matching-refs/tags/v0.0.", headers=headers, timeout=30)
-    if response.status_code != 200:
-        return None
-
-    tags = response.json()
-    tag_names = []
-    for tag in tags:
-        ref = tag['ref']
-        if ref.startswith('refs/tags/v0.0.'):
-            tag_name = ref.replace('refs/tags/', '')
-            try:
-                version_num = int(tag_name.split('.')[-1])
-                tag_names.append((version_num, tag_name))
-            except (ValueError, IndexError):
-                continue
-
-    if not tag_names:
-        return None
-
-    # Sort by version number (descending) and check recent tags
-    tag_names.sort(reverse=True)
-    target = f"leanprover/lean4:{version}"
-    for _, tag_name in tag_names[:20]:
-        # Fetch lean-toolchain for this tag
-        api_url = f"{api_base}/contents/lean-toolchain?ref={tag_name}"
-        resp = requests.get(api_url, headers=headers, timeout=30)
-        if resp.status_code != 200:
-            continue
-        content = base64.b64decode(resp.json().get("content", "").replace("\n", "")).decode('utf-8').strip()
-        if content == target:
-            return tag_name
-
-    return None
-
 def setup_downstream_releases_dir():
     """Create the downstream_releases directory if it doesn't exist."""
     downstream_dir = Path("downstream_releases")
@@ -479,85 +422,10 @@ def execute_release_steps(repo, version, config):
         print(blue("Updating lakefile.toml..."))
         run_command(f'perl -pi -e \'s/"v4\\.[0-9]+(\\.[0-9]+)?(-rc[0-9]+)?"/"' + version + '"/g\' lakefile.*', cwd=repo_path)
         run_command("lake update", cwd=repo_path, stream_output=True)
-    elif repo_name == "verso":
-        # verso has nested Lake projects in test-projects/ that each have their own
-        # lake-manifest.json with a subverso pin. After updating the root manifest via
-        # `lake update`, sync the de-modulized subverso rev into all sub-manifests.
-        # The sub-projects use an old toolchain (v4.21.0) that doesn't support module/prelude
-        # syntax, so they need the de-modulized version (tagged no-modules/<root-rev>).
-        # The "SubVerso version consistency" CI check accepts either the root or de-modulized rev.
-        run_command("lake update", cwd=repo_path, stream_output=True)
-        print(blue("Syncing de-modulized subverso rev to test-project sub-manifests..."))
-        sync_script = (
-            'ROOT_REV=$(jq -r \'.packages[] | select(.name == "subverso") | .rev\' lake-manifest.json); '
-            'SUBVERSO_URL=$(jq -r \'.packages[] | select(.name == "subverso") | .url\' lake-manifest.json); '
-            'DEMOD_REV=$(git ls-remote "$SUBVERSO_URL" "refs/tags/no-modules/$ROOT_REV" | awk \'{print $1}\'); '
-            'find test-projects -name lake-manifest.json -print0 | while IFS= read -r -d \'\' f; do '
-            'jq --arg rev "$DEMOD_REV" \'.packages |= map(if .name == "subverso" then .rev = $rev else . end)\' "$f" > /tmp/lm_tmp.json && mv /tmp/lm_tmp.json "$f"; '
-            'done'
-        )
-        run_command(sync_script, cwd=repo_path)
-        print(green("Synced de-modulized subverso rev to all test-project sub-manifests"))
     elif dependencies:
         run_command(f'perl -pi -e \'s/"v4\\.[0-9]+(\\.[0-9]+)?(-rc[0-9]+)?"/"' + version + '"/g\' lakefile.*', cwd=repo_path)
         run_command("lake update", cwd=repo_path, stream_output=True)
 
-    # For reference-manual, update the release notes title to match the target version.
-    # e.g., for a stable release, change "Lean 4.28.0-rc1 (date)" to "Lean 4.28.0 (date)"
-    # e.g., for rc2, change "Lean 4.28.0-rc1 (date)" to "Lean 4.28.0-rc2 (date)"
-    if repo_name == "reference-manual":
-        base_version = version.lstrip('v').split('-')[0]  # "4.28.0"
-        file_name = f"v{base_version.replace('.', '_')}.lean"
-        release_notes_file = repo_path / "Manual" / "Releases" / file_name
-
-        if release_notes_file.exists():
-            is_rc = "-rc" in version
-            if is_rc:
-                # For RC releases, update to the exact RC version
-                display_version = version.lstrip('v')  # "4.28.0-rc2"
-            else:
-                # For stable releases, strip any RC suffix
-                display_version = base_version  # "4.28.0"
-
-            print(blue(f"Updating release notes title in {file_name}..."))
-            content = release_notes_file.read_text()
-            # Match the #doc line title: "Lean X.Y.Z-rcN (date)" or "Lean X.Y.Z (date)"
-            new_content = re.sub(
-                r'(#doc\s+\(Manual\)\s+"Lean\s+)\d+\.\d+\.\d+(-rc\d+)?(\s+\([^)]*\)"\s*=>)',
-                rf'\g<1>{display_version}\3',
-                content
-            )
-            if new_content != content:
-                release_notes_file.write_text(new_content)
-                print(green(f"Updated release notes title to Lean {display_version}"))
-            else:
-                print(green("Release notes title already correct"))
-        else:
-            print(yellow(f"Release notes file {file_name} not found, skipping title update"))
-
-    # For mathlib4, update ProofWidgets4 pin (it uses sequential v0.0.X tags, not v4.X.Y)
-    if repo_name == "mathlib4":
-        print(blue("Checking ProofWidgets4 version pin..."))
-        pw_tag = find_proofwidgets_tag(version)
-        if pw_tag:
-            print(blue(f"Updating ProofWidgets4 pin to {pw_tag}..."))
-            for lakefile in repo_path.glob("lakefile.*"):
-                content = lakefile.read_text()
-                # Only update the ProofWidgets4 dependency line, not other v0.0.X pins
-                new_content = re.sub(
-                    r'(require\s+"leanprover-community"\s*/\s*"proofwidgets"\s*@\s*git\s+"v)0\.0\.\d+(")',
-                    rf'\g<1>{pw_tag.removeprefix("v")}\2',
-                    content
-                )
-                if new_content != content:
-                    lakefile.write_text(new_content)
-                    print(green(f"Updated ProofWidgets4 pin in {lakefile.name}"))
-            run_command("lake update proofwidgets", cwd=repo_path, stream_output=True)
-            print(green(f"Updated ProofWidgets4 to {pw_tag}"))
-        else:
-            print(yellow(f"Could not find a ProofWidgets4 tag for toolchain {version}"))
-            print(yellow("You may need to update the ProofWidgets4 pin manually"))
-
     # Commit changes (only if there are changes)
     print(blue("Checking for changes to commit..."))
     try:

src/CMakeLists.txt

@@ -1,4 +1,6 @@
-cmake_minimum_required(VERSION 3.21)
+cmake_minimum_required(VERSION 3.10)
+cmake_policy(SET CMP0054 NEW)
+cmake_policy(SET CMP0110 NEW)
 if(NOT CMAKE_GENERATOR MATCHES "Unix Makefiles")
   message(FATAL_ERROR "The only supported CMake generator at the moment is 'Unix Makefiles'")
 endif()
@@ -7,17 +9,11 @@ if(NOT DEFINED STAGE)
 endif()
 include(ExternalProject)
 project(LEAN CXX C)
-set(LEAN_VERSION_MAJOR 4 CACHE STRING "")
-set(LEAN_VERSION_MINOR 30 CACHE STRING "")
-set(LEAN_VERSION_PATCH 0 CACHE STRING "")
-set(LEAN_VERSION_IS_RELEASE 0 CACHE STRING "") # This number is 1 in the release revision, and 0 otherwise.
+set(LEAN_VERSION_MAJOR 4)
+set(LEAN_VERSION_MINOR 29)
+set(LEAN_VERSION_PATCH 0)
+set(LEAN_VERSION_IS_RELEASE 0) # This number is 1 in the release revision, and 0 otherwise.
 set(LEAN_SPECIAL_VERSION_DESC "" CACHE STRING "Additional version description like 'nightly-2018-03-11'")
-# project(LEAN) above implicitly creates empty LEAN_VERSION_{MAJOR,MINOR,PATCH}
-# normal variables (CMake sets <PROJECT>_VERSION_* for the project name). These
-# shadow the cache values. Remove them so ${VAR} falls through to the cache.
-unset(LEAN_VERSION_MAJOR)
-unset(LEAN_VERSION_MINOR)
-unset(LEAN_VERSION_PATCH)
 set(LEAN_VERSION_STRING "${LEAN_VERSION_MAJOR}.${LEAN_VERSION_MINOR}.${LEAN_VERSION_PATCH}")
 if(LEAN_SPECIAL_VERSION_DESC)
   string(APPEND LEAN_VERSION_STRING "-${LEAN_SPECIAL_VERSION_DESC}")
@@ -87,8 +83,6 @@ option(USE_GITHASH "GIT_HASH" ON)
 option(INSTALL_LICENSE "INSTALL_LICENSE" ON)
 # When ON we install a copy of cadical
 option(INSTALL_CADICAL "Install a copy of cadical" ON)
-# When ON we install a copy of leantar
-option(INSTALL_LEANTAR "Install a copy of leantar" ON)
 
 # FLAGS for disabling optimizations and debugging
 option(FREE_VAR_RANGE_OPT "FREE_VAR_RANGE_OPT" ON)
@@ -118,9 +112,6 @@ option(USE_LAKE_CACHE "Use the Lake artifact cache for stage 1 builds (requires
 set(LEAN_EXTRA_MAKE_OPTS "" CACHE STRING "extra options to lean --make")
 set(LEANC_CC ${CMAKE_C_COMPILER} CACHE STRING "C compiler to use in `leanc`")
 
-# Temporary, core-only flags. Must be synced with stdlib_flags.h.
-string(APPEND LEAN_EXTRA_MAKE_OPTS " -Dbackward.do.legacy=false")
-
 if(LAZY_RC MATCHES "ON")
   set(LEAN_LAZY_RC "#define LEAN_LAZY_RC")
 endif()
@@ -259,7 +250,7 @@ else()
 endif()
 
 if(NOT MSVC)
-  set(CMAKE_CXX_FLAGS "-Wall -Wextra -std=c++20 ${CMAKE_CXX_FLAGS}")
+  set(CMAKE_CXX_FLAGS "-Wall -Wextra -std=c++14 ${CMAKE_CXX_FLAGS}")
   set(CMAKE_CXX_FLAGS_DEBUG "-g3 ${CMAKE_CXX_FLAGS_DEBUG}")
   if(CMAKE_SYSTEM_NAME MATCHES "Emscripten")
     # smallest+slower | -Oz .. -Os .. -O3 | largest+faster
@@ -762,14 +753,6 @@ if(STAGE GREATER 0 AND CADICAL AND INSTALL_CADICAL)
   add_dependencies(leancpp copy-cadical)
 endif()
 
-if(LEANTAR AND INSTALL_LEANTAR)
-  add_custom_target(
-    copy-leantar
-    COMMAND cmake -E copy_if_different "${LEANTAR}" "${CMAKE_BINARY_DIR}/bin/leantar${CMAKE_EXECUTABLE_SUFFIX}"
-  )
-  add_dependencies(leancpp copy-leantar)
-endif()
-
 # MSYS2 bash usually handles Windows paths relatively well, but not when putting them in the PATH
 string(REGEX REPLACE "^([a-zA-Z]):" "/\\1" LEAN_BIN "${CMAKE_BINARY_DIR}/bin")
 
@@ -797,7 +780,7 @@ if(LLVM AND STAGE GREATER 0)
   set(EXTRA_LEANMAKE_OPTS "LLVM=1")
 endif()
 
-set(STDLIBS Init Std Lean Leanc LeanIR)
+set(STDLIBS Init Std Lean Leanc)
 if(NOT CMAKE_SYSTEM_NAME MATCHES "Emscripten")
   list(APPEND STDLIBS Lake LeanChecker)
 endif()
@@ -904,16 +887,9 @@ if(PREV_STAGE)
   add_custom_target(update-stage0-commit COMMAND git commit -m "chore: update stage0" DEPENDS update-stage0)
 endif()
 
-if(NOT CMAKE_SYSTEM_NAME MATCHES "Emscripten")
-  add_custom_target(leanir ALL
-    DEPENDS leanshared
-    COMMAND $(MAKE) -f ${CMAKE_BINARY_DIR}/stdlib.make leanir
-    VERBATIM)
-endif()
-
 # use Bash version for building, use Lean version in bin/ for tests & distribution
 configure_file("${LEAN_SOURCE_DIR}/bin/leanc.in" "${CMAKE_BINARY_DIR}/leanc.sh" @ONLY)
-if(STAGE GREATER 0 AND NOT CMAKE_SYSTEM_NAME MATCHES "Emscripten")
+if(STAGE GREATER 0 AND EXISTS "${LEAN_SOURCE_DIR}/Leanc.lean" AND NOT CMAKE_SYSTEM_NAME MATCHES "Emscripten")
   configure_file("${LEAN_SOURCE_DIR}/Leanc.lean" "${CMAKE_BINARY_DIR}/leanc/Leanc.lean" @ONLY)
   add_custom_target(
     leanc
@@ -933,10 +909,6 @@ if(STAGE GREATER 0 AND CADICAL AND INSTALL_CADICAL)
   install(PROGRAMS "${CADICAL}" DESTINATION bin)
 endif()
 
-if(LEANTAR AND INSTALL_LEANTAR)
-  install(PROGRAMS "${LEANTAR}" DESTINATION bin)
-endif()
-
 add_custom_target(
   clean-stdlib
   COMMAND rm -rf "${CMAKE_BINARY_DIR}/lib" || true
@@ -952,7 +924,6 @@ install(
   PATTERN "*.hash" EXCLUDE
   PATTERN "*.trace" EXCLUDE
   PATTERN "*.rsp" EXCLUDE
-  PATTERN "*.filelist" EXCLUDE
 )
 
 # symlink source into expected installation location for go-to-definition, if file system allows it

src/Init.lean

@@ -30,7 +30,6 @@ public import Init.Hints
 public import Init.Conv
 public import Init.Guard
 public import Init.Simproc
-public import Init.CbvSimproc
 public import Init.SizeOfLemmas
 public import Init.BinderPredicates
 public import Init.Ext
@@ -43,7 +42,7 @@ public import Init.While
 public import Init.Syntax
 public import Init.Internal
 public import Init.Try
-public meta import Init.Try  -- shake: keep (make sure `Try.Config` can be evaluated anywhere)
+public meta import Init.Try  -- make sure `Try.Config` can be evaluated anywhere
 public import Init.BinderNameHint
 public import Init.Task
 public import Init.MethodSpecsSimp

src/Init/BinderNameHint.lean

@@ -7,8 +7,7 @@ Authors: Joachim Breitner
 module
 
 prelude
-public import Init.Prelude
-import Init.Tactics
+public import Init.Tactics
 
 public section
 

src/Init/BinderPredicates.lean

@@ -6,10 +6,7 @@ Authors: Gabriel Ebner
 module
 
 prelude
-public meta import Init.Grind.Tactics
-public import Init.Notation
-import Init.Meta.Defs
-import Init.NotationExtra
+public import Init.NotationExtra
 
 public section
 

src/Init/ByCases.lean

@@ -6,9 +6,7 @@ Authors: Leonardo de Moura, Mario Carneiro
 module
 
 prelude
-public meta import Init.Grind.Tactics
-public import Init.Grind.Tactics
-import Init.SimpLemmas
+public import Init.Classical
 
 public section
 

src/Init/CbvSimproc.lean

@@ -1,71 +0,0 @@
-/-
-Copyright (c) 2026 Lean FRO, LLC. All rights reserved.
-Released under Apache 2.0 license as described in the file LICENSE.
-Authors: Wojciech Różowski
--/
-module
-
-prelude
-public meta import Init.Data.ToString.Name  -- shake: keep (transitive public meta dep, fix)
-public import Init.Tactics
-import Init.Meta.Defs
-
-public section
-
-namespace Lean.Parser
-
-syntax cbvSimprocEval := "cbv_eval"
-
-/--
-A user-defined simplification procedure used by the `cbv` tactic.
-The body must have type `Lean.Meta.Sym.Simp.Simproc` (`Expr → SimpM Result`).
-Procedures are indexed by a discrimination tree pattern and fire at one of three phases:
-`↓` (pre), `cbv_eval` (eval), or `↑` (post, default).
--/
-syntax (docComment)? attrKind "cbv_simproc " (Tactic.simpPre <|> Tactic.simpPost <|> cbvSimprocEval)? ident " (" term ")" " := " term : command
-
-/--
-A `cbv_simproc` declaration without automatically adding it to the cbv simproc set.
-To activate, use `attribute [cbv_simproc]`.
--/
-syntax (docComment)? "cbv_simproc_decl " ident " (" term ")" " := " term : command
-
-syntax (docComment)? attrKind "builtin_cbv_simproc " (Tactic.simpPre <|> Tactic.simpPost <|> cbvSimprocEval)? ident " (" term ")" " := " term : command
-
-syntax (docComment)? "builtin_cbv_simproc_decl " ident " (" term ")" " := " term : command
-
-syntax (name := cbvSimprocPattern) "cbv_simproc_pattern% " term " => " ident : command
-
-syntax (name := cbvSimprocPatternBuiltin) "builtin_cbv_simproc_pattern% " term " => " ident : command
-
-namespace Attr
-
-syntax (name := cbvSimprocAttr) "cbv_simproc" (Tactic.simpPre <|> Tactic.simpPost <|> cbvSimprocEval)? : attr
-
-syntax (name := cbvSimprocBuiltinAttr) "builtin_cbv_simproc" (Tactic.simpPre <|> Tactic.simpPost <|> cbvSimprocEval)? : attr
-
-end Attr
-
-macro_rules
-  | `($[$doc?:docComment]? cbv_simproc_decl $n:ident ($pattern:term) := $body) => do
-    let simprocType := `Lean.Meta.Sym.Simp.Simproc
-    `($[$doc?:docComment]? meta def $n:ident : $(mkIdent simprocType) := $body
-      cbv_simproc_pattern% $pattern => $n)
-
-macro_rules
-  | `($[$doc?:docComment]? builtin_cbv_simproc_decl $n:ident ($pattern:term) := $body) => do
-    let simprocType := `Lean.Meta.Sym.Simp.Simproc
-    `($[$doc?:docComment]? def $n:ident : $(mkIdent simprocType) := $body
-      builtin_cbv_simproc_pattern% $pattern => $n)
-
-macro_rules
-  | `($[$doc?:docComment]? $kind:attrKind cbv_simproc $[$phase?]? $n:ident ($pattern:term) := $body) => do
-    `($[$doc?:docComment]? cbv_simproc_decl $n ($pattern) := $body
-      attribute [$kind cbv_simproc $[$phase?]?] $n)
-
-macro_rules
-  | `($[$doc?:docComment]? $kind:attrKind builtin_cbv_simproc $[$phase?]? $n:ident ($pattern:term) := $body) => do
-    `($[$doc?:docComment]? builtin_cbv_simproc_decl $n ($pattern) := $body
-      attribute [$kind builtin_cbv_simproc $[$phase?]?] $n)
-
-end Lean.Parser

src/Init/Classical.lean

@@ -69,11 +69,9 @@ theorem em (p : Prop) : p ∨ ¬p :=
 theorem exists_true_of_nonempty {α : Sort u} : Nonempty α → ∃ _ : α, True
   | ⟨x⟩ => ⟨x, trivial⟩
 
-@[implicit_reducible]
 noncomputable def inhabited_of_nonempty {α : Sort u} (h : Nonempty α) : Inhabited α :=
   ⟨choice h⟩
 
-@[implicit_reducible]
 noncomputable def inhabited_of_exists {α : Sort u} {p : α → Prop} (h : ∃ x, p x) : Inhabited α :=
   inhabited_of_nonempty (Exists.elim h (fun w _ => ⟨w⟩))
 
@@ -83,7 +81,6 @@ noncomputable scoped instance (priority := low) propDecidable (a : Prop) : Decid
     | Or.inl h => ⟨isTrue h⟩
     | Or.inr h => ⟨isFalse h⟩
 
-@[implicit_reducible]
 noncomputable def decidableInhabited (a : Prop) : Inhabited (Decidable a) where
   default := inferInstance
 
@@ -145,7 +142,7 @@ is classically true but not constructively. -/
 
 /-- Transfer decidability of `¬ p` to decidability of `p`. -/
 -- This can not be an instance as it would be tried everywhere.
-@[implicit_reducible]
+@[instance_reducible]
 def decidable_of_decidable_not (p : Prop) [h : Decidable (¬ p)] : Decidable p :=
   match h with
   | isFalse h => isTrue (Classical.not_not.mp h)

src/Init/Control.lean

@@ -17,5 +17,3 @@ public import Init.Control.Lawful
 public import Init.Control.StateCps
 public import Init.Control.ExceptCps
 public import Init.Control.MonadAttach
-public import Init.Control.EState
-public import Init.Control.Do

src/Init/Control/Basic.lean

@@ -322,8 +322,6 @@ class MonadControl (m : semiOutParam (Type u → Type v)) (n : Type u → Type w
   -/
   restoreM : {α : Type u} → m (stM α) → n α
 
-attribute [reducible] MonadControl.stM
-
 /--
 A way to lift a computation from one monad to another while providing the lifted computation with a
 means of interpreting computations from the outer monad. This provides a means of lifting
@@ -351,8 +349,6 @@ class MonadControlT (m : Type u → Type v) (n : Type u → Type w) where
   -/
   restoreM {α : Type u} : stM α → n α
 
-attribute [reducible] MonadControlT.stM
-
 export MonadControlT (stM liftWith restoreM)
 
 @[always_inline]

src/Init/Control/Do.lean

@@ -1,63 +0,0 @@
-/-
-Copyright (c) 2025 Lean FRO LLC. All rights reserved.
-Released under Apache 2.0 license as described in the file LICENSE.
-Authors: Sebastian Graf
--/
-module
-
-prelude
-public import Init.Control.Except
-public import Init.Control.Option
-
-public section
-
-/-!
-This module provides specialized wrappers around `ExceptT` to support the `do` elaborator.
-
-Specifically, the types here are used to tunnel early `return`, `break` and `continue` through
-non-algebraic higher-order effect combinators such as `tryCatch`.
--/
-
-/-- A wrapper around `ExceptT` signifying early return. -/
-@[expose]
-abbrev EarlyReturnT (ρ m α) := ExceptT ρ m α
-
-/-- Exit a computation by returning a value `r : ρ` early. -/
-@[always_inline, inline, expose]
-abbrev EarlyReturnT.return {ρ m α} [Monad m] (r : ρ) : EarlyReturnT ρ m α :=
-  throw r
-
-/-- A specialization of `Except.casesOn`. -/
-@[always_inline, inline, expose]
-abbrev EarlyReturn.runK {ρ α : Type u} {β : Type v} (x : Except ρ α) (ret : ρ → β) (pure : α → β) : β :=
-  x.casesOn ret pure
-
-/-- A wrapper around `OptionT` signifying `break` in a loop. -/
-@[expose]
-abbrev BreakT := OptionT
-
-/-- Exit a loop body via `break`. -/
-@[always_inline, inline, expose]
-abbrev BreakT.break {m : Type w → Type x} [Monad m] : BreakT m α := failure
-
-/-- A specialization of `Option.casesOn`. -/
-@[always_inline, inline, expose]
-abbrev Break.runK {α : Type u} {β : Type v} (x : Option α) (breakK : Unit → β) (successK : α → β) : β :=
-  -- Note: The matcher below is used in the elaborator targeting `forIn` loops.
-  -- If you change the order of match arms here, you may need to adjust the elaborator.
-  match x with
-  | some a => successK a
-  | none => breakK ()
-
-/-- A wrapper around `OptionT` signifying `continue` in a loop. -/
-@[expose]
-abbrev ContinueT := OptionT
-
-/-- Exit a loop body via `continue`. -/
-@[always_inline, inline, expose]
-abbrev ContinueT.continue {m : Type w → Type x} [Monad m] : ContinueT m α := failure
-
-/-- A specialization of `Option.casesOn`. -/
-@[always_inline, inline, expose]
-abbrev Continue.runK {α : Type u} {β : Type v} (x : Option α) (continueK : Unit → β) (successK : α → β) : β :=
-  x.casesOn continueK (fun a _ => successK a) ()

src/Init/Control/EState.lean

@@ -7,7 +7,6 @@ module
 
 prelude
 public import Init.Data.ToString.Basic
-public import Init.Control.State
 
 public section
 universe u v

src/Init/Control/ExceptCps.lean

@@ -7,7 +7,6 @@ module
 
 prelude
 public import Init.Control.Lawful.Basic
-import Init.SimpLemmas
 
 public section
 

src/Init/Control/Id.lean

@@ -8,6 +8,7 @@ The identity Monad.
 module
 
 prelude
+public import Init.Core
 public import Init.Control.MonadAttach
 
 public section
@@ -49,7 +50,6 @@ instance : Monad Id where
 /--
 The identity monad has a `bind` operator.
 -/
-@[implicit_reducible]
 def hasBind : Bind Id :=
   inferInstance
 
@@ -59,7 +59,7 @@ Runs a computation in the identity monad.
 This function is the identity function. Because its parameter has type `Id α`, it causes
 `do`-notation in its arguments to use the `Monad Id` instance.
 -/
-@[always_inline, inline, expose, implicit_reducible]
+@[always_inline, inline, expose]
 protected def run (x : Id α) : α := x
 
 instance [OfNat α n] : OfNat (Id α) n :=
@@ -80,11 +80,3 @@ instance : LawfulMonadAttach Id where
     exact x.run.2
 
 end Id
-
-/-- Turn a collection with a pure `ForIn` instance into an array. -/
-def ForIn.toArray {α : Type u} [inst : ForIn Id ρ α] (xs : ρ) : Array α :=
-  ForIn.forIn xs Array.empty (fun a acc => pure (.yield (acc.push a))) |> Id.run
-
-/-- Turn a collection with a pure `ForIn` instance into a list. -/
-def ForIn.toList {α : Type u} [ForIn Id ρ α] (xs : ρ) : List α :=
-  ForIn.toArray xs |>.toList

src/Init/Control/Lawful/Basic.lean

@@ -6,9 +6,7 @@ Authors: Sebastian Ullrich, Leonardo de Moura, Mario Carneiro
 module
 
 prelude
-public import Init.Control.Id
-public import Init.Grind.Tactics
-import Init.Ext
+public import Init.Ext
 
 public section
 
@@ -254,8 +252,8 @@ instance : LawfulMonad Id := by
 @[simp, grind =] theorem run_bind (x : Id α) (f : α → Id β) : (x >>= f).run = (f x.run).run := rfl
 @[simp, grind =] theorem run_pure (a : α) : (pure a : Id α).run = a := rfl
 @[simp, grind =] theorem pure_run (a : Id α) : pure a.run = a := rfl
-@[simp] theorem run_seqRight (x : Id α) (y : Id β) : (x *> y).run = y.run := rfl
-@[simp] theorem run_seqLeft (x : Id α) (y : Id β) : (x <* y).run = x.run := rfl
+@[simp] theorem run_seqRight (x y : Id α) : (x *> y).run = y.run := rfl
+@[simp] theorem run_seqLeft (x y : Id α) : (x <* y).run = x.run := rfl
 @[simp] theorem run_seq (f : Id (α → β)) (x : Id α) : (f <*> x).run = f.run x.run := rfl
 
 end Id

src/Init/Control/Lawful/Instances.lean

@@ -12,8 +12,6 @@ public import Init.Control.Option
 import all Init.Control.Option
 import all Init.Control.State
 public import Init.Control.StateRef
-public import Init.Control.State
-public import Init.Ext
 
 public section
 
@@ -30,8 +28,6 @@ namespace ExceptT
   simp [run] at h
   assumption
 
-@[simp] theorem stM_eq [Monad m] : stM m (ExceptT ε m) α = Except ε α := rfl
-
 @[simp, grind =] theorem run_mk (x : m (Except ε α)) : run (mk x : ExceptT ε m α) = x := rfl
 
 @[simp, grind =] theorem run_pure [Monad m] (x : α) : run (pure x : ExceptT ε m α) = pure (Except.ok x) := rfl
@@ -120,7 +116,7 @@ instance [Monad m] [LawfulMonad m] : LawfulMonad (ExceptT ε m) where
 
 @[simp] theorem run_controlAt [Monad m] [LawfulMonad m] (f : ({β : Type u} → ExceptT ε m β → m (stM m (ExceptT ε m) β)) → m (stM m (ExceptT ε m) α)) :
     ExceptT.run (controlAt m f) = f fun x => x.run := by
-  simp [controlAt, run_bind]
+  simp [controlAt, run_bind, bind_map_left]
 
 @[simp] theorem run_control [Monad m] [LawfulMonad m] (f : ({β : Type u} → ExceptT ε m β → m (stM m (ExceptT ε m) β)) → m (stM m (ExceptT ε m) α)) :
     ExceptT.run (control f) = f fun x => x.run := run_controlAt f
@@ -439,6 +435,7 @@ instance [Monad m] [LawfulMonad m] : LawfulMonad (StateT σ m) where
 @[simp] theorem run_restoreM [Monad m] [LawfulMonad m] (x : stM m (StateT σ m) α) (s : σ) :
     StateT.run (restoreM x) s = pure x := by
   simp [restoreM, MonadControl.restoreM]
+  rfl
 
 @[simp] theorem run_liftWith [Monad m] [LawfulMonad m] (f : ({β : Type u} → StateT σ m β → m (stM m (StateT σ m) β)) → m α) (s : σ) :
     StateT.run (liftWith f) s = ((·, s) <$> f fun x => x.run s) := by

src/Init/Control/Lawful/Lemmas.lean

@@ -7,9 +7,7 @@ module
 
 prelude
 public import Init.Control.Lawful.Basic
-public import Init.Classical
-public import Init.Ext
-import Init.ByCases
+public import Init.ByCases
 
 public section
 

src/Init/Control/Lawful/MonadAttach/Instances.lean

@@ -6,17 +6,14 @@ Authors: Paul Reichert
 module
 
 prelude
+public import Init.Control.Reader
+public import Init.Control.Lawful.Instances
 import Init.Control.Lawful.MonadAttach.Lemmas
-public import Init.Control.Lawful.Basic
-public import Init.Control.State
-public import Init.Control.StateRef
-public import Init.Ext
 
 public instance [Monad m] [LawfulMonad m] [MonadAttach m] [WeaklyLawfulMonadAttach m] :
     WeaklyLawfulMonadAttach (ReaderT ρ m) where
   map_attach := by
-    simp only [Functor.map, MonadAttach.attach, Functor.map_map, WeaklyLawfulMonadAttach.map_attach,
-      MonadAttach.CanReturn]
+    simp only [Functor.map, MonadAttach.attach, Functor.map_map, WeaklyLawfulMonadAttach.map_attach]
     intros; rfl
 
 public instance [Monad m] [LawfulMonad m] [MonadAttach m] [LawfulMonadAttach m] :
@@ -31,7 +28,7 @@ public instance [Monad m] [LawfulMonad m] [MonadAttach m] [WeaklyLawfulMonadAtta
   map_attach := by
     intro α x
     simp only [Functor.map, StateT, funext_iff, StateT.map, bind_pure_comp, MonadAttach.attach,
-      Functor.map_map, MonadAttach.CanReturn]
+      Functor.map_map]
     exact fun s => WeaklyLawfulMonadAttach.map_attach
 
 public instance [Monad m] [LawfulMonad m] [MonadAttach m] [LawfulMonadAttach m] :
@@ -46,7 +43,7 @@ public instance [Monad m] [LawfulMonad m] [MonadAttach m] [LawfulMonadAttach m]
 public instance [Monad m] [LawfulMonad m] [MonadAttach m] [WeaklyLawfulMonadAttach m] :
     WeaklyLawfulMonadAttach (ExceptT ε m) where
   map_attach {α} x := by
-    simp only [Functor.map, MonadAttach.attach, ExceptT.map, MonadAttach.CanReturn]
+    simp only [Functor.map, MonadAttach.attach, ExceptT.map]
     simp
     conv => rhs; rw [← WeaklyLawfulMonadAttach.map_attach (m := m) (x := x)]
     simp only [map_eq_pure_bind]
@@ -84,6 +81,6 @@ attribute [local instance] MonadAttach.trivial
 
 public instance [Monad m] [LawfulMonad m] :
     WeaklyLawfulMonadAttach m where
-  map_attach := by simp [MonadAttach.attach, MonadAttach.CanReturn]
+  map_attach := by simp [MonadAttach.attach]
 
 end

src/Init/Control/Lawful/MonadAttach/Lemmas.lean

@@ -6,12 +6,10 @@ Authors: Paul Reichert
 module
 
 prelude
+public import Init.Control.MonadAttach
 import all Init.Control.MonadAttach
-public import Init.Classical
-public import Init.Control.Lawful.Basic
-public import Init.Control.Lawful.MonadLift.Basic
-import Init.Control.Lawful.MonadLift.Lemmas
-import Init.RCases
+public import Init.Control.Lawful.Lemmas
+public import Init.Control.Lawful.MonadLift.Lemmas
 
 public theorem LawfulMonadAttach.canReturn_bind_imp' [Monad m] [LawfulMonad m]
     [MonadAttach m] [LawfulMonadAttach m]

src/Init/Control/Lawful/MonadLift/Basic.lean

@@ -6,7 +6,7 @@ Authors: Quang Dao
 module
 
 prelude
-public import Init.Notation
+public import Init.Control.Basic
 
 public section
 

src/Init/Control/Lawful/MonadLift/Instances.lean

@@ -14,12 +14,8 @@ import all Init.Control.StateRef
 public import Init.Control.StateCps
 import all Init.Control.StateCps
 import all Init.Control.Id
-public import Init.Control.Lawful.MonadLift.Basic
-public import Init.Control.Option
-public import Init.Control.State
-public import Init.Control.StateRef
-import Init.Control.Lawful.Instances
-import Init.Control.Lawful.MonadLift.Lemmas
+public import Init.Control.Lawful.MonadLift.Lemmas
+public import Init.Control.Lawful.Instances
 
 public section
 

src/Init/Control/Lawful/MonadLift/Lemmas.lean

@@ -6,9 +6,9 @@ Authors: Quang Dao
 module
 
 prelude
+public import Init.Control.Id
 public import Init.Control.Lawful.Basic
 public import Init.Control.Lawful.MonadLift.Basic
-import Init.Ext
 
 public section
 
@@ -17,7 +17,7 @@ universe u v w
 theorem instMonadLiftTOfMonadLift_instMonadLiftTOfPure [Monad m] [Monad n] {_ : MonadLift m n}
     [LawfulMonadLift m n] : instMonadLiftTOfMonadLift Id m n = Id.instMonadLiftTOfPure := by
   have hext {a b : MonadLiftT Id n} (h : @a.monadLift = @b.monadLift) : a = b := by
-    cases a; cases b; simp [monadLift] at h; simp [h]
+    cases a <;> cases b <;> simp_all
   apply hext
   ext α x
   simp [monadLift, LawfulMonadLift.monadLift_pure]

src/Init/Control/MonadAttach.lean

@@ -6,7 +6,7 @@ Authors: Paul Reichert
 module
 
 prelude
-public import Init.Core
+public import Init.Control.Basic
 
 set_option linter.all true
 
@@ -70,7 +70,7 @@ information to the return value, except a trivial proof of {name}`True`.
 This instance is used whenever no more useful {name}`MonadAttach` instance can be implemented.
 It always has a {name}`WeaklyLawfulMonadAttach`, but usually no {name}`LawfulMonadAttach` instance.
 -/
-@[expose, implicit_reducible]
+@[expose, instance_reducible]
 public protected def MonadAttach.trivial {m : Type u → Type v} [Monad m] : MonadAttach m where
   CanReturn _ _ := True
   attach x := (⟨·, .intro⟩) <$> x

src/Init/Control/Option.lean

@@ -7,7 +7,7 @@ module
 
 prelude
 public import Init.Data.Option.Basic
-public import Init.Control.MonadAttach
+public import Init.Control.Except
 
 public section
 

src/Init/Control/StateCps.lean

@@ -7,7 +7,6 @@ module
 
 prelude
 public import Init.Control.Lawful.Basic
-public import Init.Ext
 
 public section
 

src/Init/Control/StateRef.lean

@@ -9,7 +9,6 @@ module
 
 prelude
 public import Init.System.ST
-public import Init.Control.Reader
 
 public section
 

src/Init/Conv.lean

@@ -51,16 +51,8 @@ scoped syntax (name := withAnnotateState)
 /-- `skip` does nothing. -/
 syntax (name := skip) "skip" : conv
 
-/--
-`cbv` performs simplification that closely mimics call-by-value evaluation.
-It reduces the target term by unfolding definitions using their defining equations and
-applying matcher equations. The unfolding is propositional, so `cbv` also works
-with functions defined via well-founded recursion or partial fixpoints.
-
-The proofs produced by `cbv` only use the three standard axioms.
-In particular, they do not require trust in the correctness of the code
-generator.
--/
+/-- `cbv` performs simplification that closely mimics call-by-value evaluation,
+using equations associated with definitions and the matchers. -/
 syntax (name := cbv) "cbv" : conv
 
 /--
@@ -277,7 +269,7 @@ resulting in `t'`, which becomes the new target subgoal. -/
 syntax (name := convConvSeq) "conv" " => " convSeq : conv
 
 /-- `· conv` focuses on the main conv goal and tries to solve it using `s`. -/
-macro dot:unicode("· ", ". ") s:convSeq : conv => `(conv| {%$dot ($s) })
+macro dot:patternIgnore("· " <|> ". ") s:convSeq : conv => `(conv| {%$dot ($s) })
 
 
 /-- `fail_if_success t` fails if the tactic `t` succeeds. -/

src/Init/Core.lean

@@ -9,7 +9,6 @@ module
 
 prelude
 public import Init.SizeOf
-public import Init.Tactics
 
 public section
 set_option linter.missingDocs true -- keep it documented
@@ -172,8 +171,6 @@ instance thunkCoe : CoeTail α (Thunk α) where
   -- Since coercions are expanded eagerly, `a` is evaluated lazily.
   coe a := ⟨fun _ => a⟩
 
-instance [Inhabited α] : Inhabited (Thunk α) := ⟨.pure default⟩
-
 /-- A variation on `Eq.ndrec` with the equality argument first. -/
 abbrev Eq.ndrecOn.{u1, u2} {α : Sort u2} {a : α} {motive : α → Sort u1} {b : α} (h : a = b) (m : motive a) : motive b :=
   Eq.ndrec m h
@@ -491,8 +488,6 @@ class HasEquiv (α : Sort u) where
   the notion of equivalence is type-dependent. -/
   Equiv : α → α → Sort v
 
-attribute [reducible] HasEquiv.Equiv
-
 @[inherit_doc] infix:50 " ≈ "  => HasEquiv.Equiv
 
 recommended_spelling "equiv" for "≈" in [HasEquiv.Equiv, «term_≈_»]
@@ -1341,10 +1336,10 @@ transitive and contains `r`. `TransGen r a z` if and only if there exists a sequ
 -/
 inductive Relation.TransGen {α : Sort u} (r : α → α → Prop) : α → α → Prop
   /-- If `r a b`, then `TransGen r a b`. This is the base case of the transitive closure. -/
-  | single {a b : α} : r a b → TransGen r a b
+  | single {a b} : r a b → TransGen r a b
   /-- If `TransGen r a b` and `r b c`, then `TransGen r a c`.
   This is the inductive case of the transitive closure. -/
-  | tail {a b c : α} : TransGen r a b → r b c → TransGen r a c
+  | tail {a b c} : TransGen r a b → r b c → TransGen r a c
 
 /-- The transitive closure is transitive. -/
 theorem Relation.TransGen.trans {α : Sort u} {r : α → α → Prop} {a b c} :
@@ -2315,13 +2310,6 @@ instance Pi.instSubsingleton {α : Sort u} {β : α → Sort v} [∀ a, Subsingl
 
 /-! # Squash -/
 
-theorem equivalence_true (α : Sort u) : Equivalence fun _ _ : α => True :=
-  ⟨fun _ => trivial, fun _ => trivial, fun _ _ => trivial⟩
-
-/-- Always-true relation as a `Setoid`. -/
-protected def Setoid.trivial (α : Sort u) : Setoid α :=
-  ⟨_, equivalence_true α⟩
-
 /--
 The quotient of `α` by the universal relation. The elements of `Squash α` are those of `α`, but all
 of them are equal and cannot be distinguished.
@@ -2335,11 +2323,8 @@ and its representation in compiled code is identical to that of `α`.
 
 Consequently, `Squash.lift` may extract an `α` value into any subsingleton type `β`, while
 `Nonempty.rec` can only do the same when `β` is a proposition.
-
-`Squash` is defined in terms of `Quotient`, so `Squash` can be used when a `Quotient` argument is
-expected.
 -/
-def Squash (α : Sort u) := Quotient (Setoid.trivial α)
+def Squash (α : Sort u) := Quot (fun (_ _ : α) => True)
 
 /--
 Places a value into its squash type, in which it cannot be distinguished from any other.
@@ -2595,11 +2580,3 @@ class Trichotomous (r : α → α → Prop) : Prop where
   trichotomous (a b : α) : ¬ r a b → ¬ r b a → a = b
 
 end Std
-
-@[simp] theorem flip_flip {α : Sort u} {β : Sort v} {φ : Sort w} {f : α → β → φ} :
-    flip (flip f) = f := by
-  apply funext
-  intro a
-  apply funext
-  intro b
-  rw [flip, flip]

src/Init/Data/AC.lean

@@ -7,9 +7,7 @@ Authors: Dany Fabian
 module
 
 prelude
-public import Init.GetElem
-import Init.ByCases
-import Init.PropLemmas
+public import Init.ByCases
 
 @[expose] public section
 

src/Init/Data/Array.lean

@@ -33,5 +33,3 @@ public import Init.Data.Array.Extract
 public import Init.Data.Array.MinMax
 public import Init.Data.Array.Nat
 public import Init.Data.Array.Int
-public import Init.Data.Array.Count
-public import Init.Data.Array.Sort

src/Init/Data/Array/Attach.lean

@@ -6,10 +6,8 @@ Authors: Joachim Breitner, Mario Carneiro
 module
 
 prelude
+public import Init.Data.Array.Count
 import all Init.Data.List.Attach
-public import Init.Data.Array.Lemmas
-import Init.Data.Array.Bootstrap
-import Init.Data.Array.Count
 
 public section
 
@@ -98,7 +96,7 @@ well-founded recursion mechanism to prove that the function terminates.
 
 @[simp] theorem pmap_push {P : α → Prop} (f : ∀ a, P a → β) (a : α) (xs : Array α) (h : ∀ b ∈ xs.push a, P b) :
     pmap f (xs.push a) h =
-      (pmap f xs (fun a m => by simp [forall_or_eq_imp] at h; exact h.1 _ m)).push (f a (h a (by simp))) := by
+      (pmap f xs (fun a m => by simp at h; exact h a (.inl m))).push (f a (h a (by simp))) := by
   simp [pmap]
 
 @[simp] theorem attach_empty : (#[] : Array α).attach = #[] := rfl
@@ -153,7 +151,7 @@ theorem attachWith_congr {xs ys : Array α} (w : xs = ys) {P : α → Prop} {H :
 
 @[simp] theorem attachWith_push {a : α} {xs : Array α} {P : α → Prop} {H : ∀ x ∈ xs.push a, P x} :
     (xs.push a).attachWith P H =
-      (xs.attachWith P (fun x h => by simp [forall_or_eq_imp] at H; exact H.1 _ h)).push ⟨a, H a (by simp)⟩ := by
+      (xs.attachWith P (fun x h => by simp at H; exact H x (.inl h))).push ⟨a, H a (by simp)⟩ := by
   cases xs
   simp
 

src/Init/Data/Array/Basic.lean

@@ -6,15 +6,11 @@ Authors: Leonardo de Moura
 module
 
 prelude
-public import Init.Control.Do
 public import Init.GetElem
 public import Init.Data.List.ToArrayImpl
 import all Init.Data.List.ToArrayImpl
 public import Init.Data.Array.Set
 import all Init.Data.Array.Set
-public import Init.WF
-meta import Init.MetaTypes
-import Init.WFTactics
 
 public section
 
@@ -148,9 +144,6 @@ end List
 
 namespace Array
 
-@[simp, grind =] theorem getElem!_toList [Inhabited α] {xs : Array α} {i : Nat} : xs.toList[i]! = xs[i]! := by
-  rw [List.getElem!_toArray]
-
 theorem size_eq_length_toList {xs : Array α} : xs.size = xs.toList.length := rfl
 
 /-! ### Externs -/
@@ -174,15 +167,6 @@ This avoids overhead due to unboxing a `Nat` used as an index.
 def uget (xs : @& Array α) (i : USize) (h : i.toNat < xs.size) : α :=
   xs[i.toNat]
 
-/--
-Version of `Array.uget` that does not increment the reference count of its result.
-
-This is only intended for direct use by the compiler.
--/
-@[extern "lean_array_uget_borrowed"]
-unsafe opaque ugetBorrowed (xs : @& Array α) (i : USize) (h : i.toNat < xs.size) : α :=
-  xs.uget i h
-
 /--
 Low-level modification operator which is as fast as a C array write. The modification is performed
 in-place when the reference to the array is unique.
@@ -286,7 +270,7 @@ Examples:
  * `#[1, 2].isEmpty = false`
  * `#[()].isEmpty = false`
 -/
-@[expose, inline]
+@[expose]
 def isEmpty (xs : Array α) : Bool :=
   xs.size = 0
 
@@ -380,7 +364,6 @@ Returns the last element of an array, or panics if the array is empty.
 Safer alternatives include `Array.back`, which requires a proof the array is non-empty, and
 `Array.back?`, which returns an `Option`.
 -/
-@[inline]
 def back! [Inhabited α] (xs : Array α) : α :=
   xs[xs.size - 1]!
 
@@ -390,7 +373,6 @@ Returns the last element of an array, given a proof that the array is not empty.
 See `Array.back!` for the version that panics if the array is empty, or `Array.back?` for the
 version that returns an option.
 -/
-@[inline]
 def back (xs : Array α) (h : 0 < xs.size := by get_elem_tactic) : α :=
   xs[xs.size - 1]'(Nat.sub_one_lt_of_lt h)
 
@@ -400,7 +382,6 @@ Returns the last element of an array, or `none` if the array is empty.
 See `Array.back!` for the version that panics if the array is empty, or `Array.back` for the version
 that requires a proof the array is non-empty.
 -/
-@[inline]
 def back? (xs : Array α) : Option α :=
   xs[xs.size - 1]?
 
@@ -559,9 +540,9 @@ def modifyOp (xs : Array α) (idx : Nat) (f : α → α) : Array α :=
   xs.modify idx f
 
 /--
-  We claim this unsafe implementation is correct because an array cannot have more than `USize.size` elements in our runtime.
+  We claim this unsafe implementation is correct because an array cannot have more than `usizeSz` elements in our runtime.
 
-  This kind of low level trick can be removed with a little bit of compiler support. For example, if the compiler simplifies `as.size < USize.size` to true. -/
+  This kind of low level trick can be removed with a little bit of compiler support. For example, if the compiler simplifies `as.size < usizeSz` to true. -/
 @[inline] unsafe def forIn'Unsafe {α : Type u} {β : Type v} {m : Type v → Type w} [Monad m] (as : Array α) (b : β) (f : (a : α) → a ∈ as → β → m (ForInStep β)) : m β :=
   let sz := as.usize
   let rec @[specialize] loop (i : USize) (b : β) : m β := do
@@ -2141,7 +2122,7 @@ Examples:
 
 /-! ### Repr and ToString -/
 
-protected def repr {α : Type u} [Repr α] (xs : Array α) : Std.Format :=
+protected def Array.repr {α : Type u} [Repr α] (xs : Array α) : Std.Format :=
   let _ : Std.ToFormat α := ⟨repr⟩
   if xs.size == 0 then
     "#[]"
@@ -2151,4 +2132,7 @@ protected def repr {α : Type u} [Repr α] (xs : Array α) : Std.Format :=
 instance {α : Type u} [Repr α] : Repr (Array α) where
   reprPrec xs _ := Array.repr xs
 
+instance [ToString α] : ToString (Array α) where
+  toString xs := String.Internal.append "#" (toString xs.toList)
+
 end Array

src/Init/Data/Array/BasicAux.lean

@@ -7,9 +7,7 @@ module
 
 prelude
 import all Init.Data.Array.Basic
-public import Init.Data.Array.Set
-public import Init.Util
-import Init.Data.Nat.Linear
+public import Init.Data.Nat.Linear
 
 public section
 

src/Init/Data/Array/BinSearch.lean

@@ -6,10 +6,7 @@ Authors: Leonardo de Moura
 module
 
 prelude
-public import Init.Data.Array.Basic
-import Init.Data.Bool
-import Init.Omega
-import Init.WFTactics
+public import Init.Data.Int.DivMod.Lemmas
 
 public section
 universe u v

src/Init/Data/Array/Bootstrap.lean

@@ -7,10 +7,8 @@ Authors: Mario Carneiro
 module
 
 prelude
+public import Init.Data.List.TakeDrop
 import all Init.Data.Array.Basic
-public import Init.Data.List.Control
-import Init.Data.List.Lemmas
-import Init.Data.List.TakeDrop
 
 public section
 
@@ -52,9 +50,7 @@ theorem foldrM_eq_reverse_foldlM_toList.aux [Monad m]
   unfold foldrM.fold
   match i with
   | 0 => simp
-  | i+1 =>
-    set_option backward.isDefEq.respectTransparency false in
-    rw [← List.take_concat_get h]; simp [← aux]
+  | i+1 => rw [← List.take_concat_get h]; simp [← aux]
 
 theorem foldrM_eq_reverse_foldlM_toList [Monad m] {f : α → β → m β} {init : β} {xs : Array α} :
     xs.foldrM f init = xs.toList.reverse.foldlM (fun x y => f y x) init := by